Scrapper 5 . . . The Rest Of The Story

As you know by now, a pic of the Scrapper 5 with an INFI logo was taken from my, supposedly, private account and posted on these forums. My account was set to private, not public, and was password protected. A few phone calls to Photobucket and they have now fixed the problem.

I was quite surprised to see it posted here and was very disappointed that someone would post it without asking permission. Doesn't it seem obvious that if I had wanted it made public, I would have posted it myself? If not, wouldn't it have been common courtesy to email me and ask for my permission? I NEVER posted a direct link to my photo gallery. It was accessed by copying the picture property code and then deleting the pic id, etc. I thank those who had access to the pic but refrained from posting it. 'Nuff said. Let's move on.

Now, for the rest of the Scrapper 5 story. The reason that the word "INFI" was covered in the photo was because I really don't know what the LE is going to be made out of yet. The Scrapper 5 INFI pic was a private joke between my brother and I. Everyday I email him a link to that pic with a different heading to prod him into going along with my latest bourbon soaked idea.

Here's the idea;

I have been trying to work with the production team at Busse to see if we could make this happen. So far, not so promising. Jerry is currently in the middle of a very large run and I am trying to convince him to use bar stock that is 6 inches longer than what they are currently using. If they do this, then the remaining length needed for the Scrapper 5 can be gleaned from the webs that they are discarding. He is getting 4 knives out of every web at this time. Using my idea, each 6 inch longer web would produce a single Scrapper 5 LE that would be priced within most everyone's range. (Under $200.00)

I was hoping to surprise you guys with that pic if we were able to make it happen out of INFI. If not, then nobody would be the wiser. No harm, no foul. The LE would be made out of 154CM as is the current plan. So, the cats out of the bag, sort of. Actually, at this point, the cat's not even in the bag. But either way, its going to be a great knife whether it's made out of INFI or 154CM.

Getting Jerry to part with additional INFI is tricky, but I've been greasing him with as much scotch as I can afford. I'll continue to keep working him over.

Now, for some really exciting news about the Combat Grade Scrapper 5. It will be made out of through-hardened SR101!!! I am very excited about this steel for this model. It truly is the best steel choice for this blade in a coated version.

Keep your fingers crossed, your glasses filled, and I'll keep you informed.

Dan

!!!!!!!!SR101!!!!!!!!! AWESOME!!!!
I hope it works out with the INFI Dan, But i'll be buying regardless!!

Thanks Dan, sorry about what happened, that's too bad to have a surprise spoiled. Infi would be excellent though, I hope Jerry will come through, thanks for all the excellent products so far!!

HELL yeah, sign me up. Thanks for clearing everything up and don't worry, I'm sure you still have many, many customers eager for that beautiful knife. I speak for myself when I say I can't wait. 154CM is an excellent steel for an excellent design. INFI would be gravy, but I wants me some meatloaf <img src="/ubbthreads/images/graemlins/smile.gif" alt="" /> Thanks again.

Dan, I am also sorry this played out like it did.

I would also like to add...Yippee!!!! S5 in 101!!! I'm so in!!! Thank you!!!!!!!!!

okay...this is pretty cool.

SR101!!!!! I will probably just get the CG instead of the LE. AWESOME!

154 CM for the LE would still be a fine knife, but the BIG news is SR101 for the CG. I may have to get one of each. Sorry about posting the pic (which I copied from somebody else), but it was an exciting idea.

Theres always a chance that it could still be INFI though. <img src="/ubbthreads/images/graemlins/crossfingers.gif" alt="" /> <img src="/ubbthreads/images/graemlins/crossfingers.gif" alt="" /> <img src="/ubbthreads/images/graemlins/crossfingers.gif" alt="" /> <img src="/ubbthreads/images/graemlins/crossfingers.gif" alt="" />

Dan with your designs ,whether INFI , 154 and SR101 you have all the bases covered....the same knife for different applications. SMART! Let me know when you release the SR101...I have a mission for him.

This is great news!!! <img src="/ubbthreads/images/graemlins/ooo.gif" alt="" /> <img src="/ubbthreads/images/graemlins/ooo.gif" alt="" /> <img src="/ubbthreads/images/graemlins/ooo.gif" alt="" /> <img src="/ubbthreads/images/graemlins/bowdown.gif" alt="" /> <img src="/ubbthreads/images/graemlins/bowdown.gif" alt="" /> <img src="/ubbthreads/images/graemlins/bowdown.gif" alt="" />

I'M IN FOR BOTH!!! Reguardless of which steel is used on the LE's!

Thanks Dan, for the rest of the story! <img src="/ubbthreads/images/graemlins/wink.gif" alt="" /> <img src="/ubbthreads/images/graemlins/thumbup.gif" alt="" /> <img src="/ubbthreads/images/graemlins/thumbup.gif" alt="" />

YAHOOO!!!!!!!!! <img src="/ubbthreads/images/graemlins/cool.gif" alt="" /> <img src="/ubbthreads/images/graemlins/cool.gif" alt="" /> <img src="/ubbthreads/images/graemlins/cool.gif" alt="" /> <img src="/ubbthreads/images/graemlins/cool.gif" alt="" />

Yes. Let's hope that the unauthorized picture was a glimpse of things to come. <img src="/ubbthreads/images/graemlins/crossfingers.gif" alt="" />

Thanks for the Idea...I'm thinking of a SCRAPY 10...what a head cleaver that would be. For the money....any money , these are THE blades which separate the fools from the survivors. When will YOUR SCRAPPER 5 photos appear?? and where is the sign up list?

Plus One!!!!!! <img src="/ubbthreads/images/graemlins/cool.gif" alt="" /> <img src="/ubbthreads/images/graemlins/cool.gif" alt="" /> <img src="/ubbthreads/images/graemlins/cool.gif" alt="" /> <img src="/ubbthreads/images/graemlins/cool.gif" alt="" /> <img src="/ubbthreads/images/graemlins/cool.gif" alt="" /> <img src="/ubbthreads/images/graemlins/cool.gif" alt="" /> <img src="/ubbthreads/images/graemlins/cool.gif" alt="" />





Welcome to the Yard, archangle. <img src="/ubbthreads/images/graemlins/smile.gif" alt="" />

Thanks....I'm a contractor...govt type. I USED blade from 30 maker over the past 25yrs , and won my first Busse in a card game in Bangkok. I was a testing advisor to DoD in the early 80's.....I only wish we had the Busse(kin) available then. Life is too short for bad and ugly knives. So my small collection is a toolbox of only those which I've tested to be reliable....My SwampRat and now my Srapeyards make up 80%. I've seen what happens when equipment fails....so I'll sick with the YARD.

Hey , RainWalker....Thanks for the link to your sheaths....How'ed you know I need one... Order we heading your way. Thanks GParrish(SgtMaj SF ret).

Sounds like a fun card game.

Wow, thanks for the Update Boss Dog!!! I can't even hold back my excitement! I will have an LE and the CG for sure!!!!! BRING IT!

Disgusting to have your account pilfered and spread as gospel when it was a brotherly prod and never gospel.Enraged,embarrassed,stained is how I feel. <img src="/ubbthreads/images/graemlins/mad.gif" alt="" /> <img src="/ubbthreads/images/graemlins/shocked.gif" alt="" /> <img src="/ubbthreads/images/graemlins/banghead.gif" alt="" /> <img src="/ubbthreads/images/graemlins/mad.gif" alt="" />

I can only begin to imagine how you feel Dan. <img src="/ubbthreads/images/graemlins/frown.gif" alt="" />

SR-101 Why that's a better surprise than INFI could be! <img src="/ubbthreads/images/graemlins/grin.gif" alt="" />

Dogs all love SR-101 and will be eager as all get out to buy some from The Yard!!! <img src="/ubbthreads/images/graemlins/bowdown.gif" alt="" /> <img src="/ubbthreads/images/graemlins/cool.gif" alt="" /> <img src="/ubbthreads/images/graemlins/bowdown.gif" alt="" />

Great news for sure! I'll take the Combat Grade in 101 please... I have three Scrappers in 154CM I already EDC if I strap on another I might look suspicious!! <img src="/ubbthreads/images/graemlins/blush.gif" alt="" />

Thanks a ton for the clarification and surprise too!! <img src="/ubbthreads/images/graemlins/grin.gif" alt="" />


Peace.

Sorry the way things worked out Dan.
Thanks for working hard trying to get us Infi
at Scrapyard prices!
Either way,I will be getting at least 1 of each (cg le)
Thanks again!

(perhaps a secondary photobucket account that you
never post pictures from to the forum would help you,
we would never know the account address or anything)

Thanks for the update Dan. Sorry to hear what happen, BUT SR101 and 154cm is going to be awesome. Still hoping for my first piece of INFI though. <img src="/ubbthreads/images/graemlins/crossfingers.gif" alt="" /> <img src="/ubbthreads/images/graemlins/crossfingers.gif" alt="" />

I don't care what it's made out of. If it's INFI, I'll buy one. If it's not, I'll buy one.

I'm sure going to hope for INFI, though!


Somebody actually hacked the account, eh? Not cool. If no password was set that's one thing, but actually hacking the password is another thing entirely.

+1!! Thanks, Dan.

infi or whatever steel is used, i just want to say thanks for the hard work!

speaking for most if i may... we really do appreciate the quality of the products and the people behind the work.



for me the choices made for the scrapper 5 have already exceeded my personal preferences... i can't wait to use one.

I hate hackers. I respect privacy. I thought the photo was legitimate. I copied it from another copy. I had no idea it came from a private account. Still, I wish I had not posted it on the forum for the hard feelings it caused.

oh... and in this day and age you really can't generate more interest that a photo leak.



RED STRIPE ANYBODY!!!!!!!

Sorry that the cat escaped. I know that you are doing your best for the Yard.

SR101 on the CG... awesome! I love the SR101 steel and with a coating, for this application, is the perfect choice.

On the LE, if you can grease Jerry with enough JWB to spring some Infi that would be ideal.

SR101? now he's gonna make me buy at least two, one LE and one CG. And here I was thinking that I only NEEDED the LE. Geesh! <img src="/ubbthreads/images/graemlins/grin.gif" alt="" />

I am definitely in as well regardless of the steel chosen for the LE. Looks like my first SY purchase will be for two knives - I think I'd like the LE and CG version of this awesome knife. <img src="/ubbthreads/images/graemlins/smile.gif" alt="" /> I am sooo excited about getting my first SY knives. <img src="/ubbthreads/images/graemlins/grin.gif" alt="" /> Ready for my new addiction to start.

Dan a cg in sr101 is VERY exciting news!!! <img src="/ubbthreads/images/graemlins/grin.gif" alt="" />

i really want to get a CG and an LE (in my JYD #)

also thanks for taking that photo deal in stride...life goes on! <img src="/ubbthreads/images/graemlins/grin.gif" alt="" />

anyone know how much you can get for selling blood?

i heard a "we buy plasma" ad on the radio so i'm thinking... HMmmmmm???? Scrapper 5's!!!!!!



my luck they'll come stupid sharp and i'd be needing that plasma. <img src="/ubbthreads/images/graemlins/doh.gif" alt="" />

Dan,

Thanks for sharing the story. Sorry things got out of hand on this one. I hope we are all good and can be past this. <img src="/ubbthreads/images/graemlins/crossfingers.gif" alt="" />

Thanks for your efforts in getting us some more INFI. <img src="/ubbthreads/images/graemlins/thumbup.gif" alt="" /> <img src="/ubbthreads/images/graemlins/bowdown.gif" alt="" /> I really hope that works out for the LE's. And think that will be VERY cool option. <img src="/ubbthreads/images/graemlins/thumbup.gif" alt="" />

Personally, I am also BIG TIME stoked about hearing about SR-101. <img src="/ubbthreads/images/graemlins/ooo.gif" alt="" /> <img src="/ubbthreads/images/graemlins/thumbup.gif" alt="" /> <img src="/ubbthreads/images/graemlins/bowdown.gif" alt="" /> I LOVE SR-101.

I wish I could get a satin SR-101 and a satin INFI if the prices are right.
If I have to strip my own SR-101 CG though, so be it. ... Hopefully, not too many pits. <img src="/ubbthreads/images/graemlins/crossfingers.gif" alt="" />
I would still love to have both SR-101 and INFI. That would be WAY cool for me and my top two choices.

I look forward to hearing the prices and the end result on the INFI.

.

Dan,
Well all I can say is you have a great design on your hands. The dogs are ready when you are. All the steel choices you have mentioned will be great.

There are some very hungry dogs waiting to pounce on this one - myself included. <img src="/ubbthreads/images/graemlins/grin.gif" alt="" />

Well, the SR101 is a very nice surprise indeed!
The CG is a definite "on the list to get knife" now.

Dan, all drama aside make it and we will buy it.......

hmmm, seems like your brother doesnt want to part with the infi. maybe you could sneak in at night and switch it with something else. or just go take it break a window and say someone stole it. [censored] it i want infi!

+1 ive been waiting on this design from the busse clan!

I still think the whole thing is kind of silly, but who am I? just an opinionated noob.

I will definitely buy one if it's in INFI, and probably buy the SR101 as well. Might even buy two of the SR101 and two of the INFI <img src="/ubbthreads/images/graemlins/grin.gif" alt="" />

Holy cow! SR101 from the Yard?! Count me in on that one! With my student budget, I was arguing with myself as to whether or not I would buy a Scrapper 5 if it were made of INFI. Now that I've read the SR101 news, I'm stoked and determined to get a combat grade instead of the potential INFI LE! Thanks for the great news, Dan!

Hmm, well maybe this will be the first time I spring for an LE. INFI or 154cm are great. Of course a combat grade in 101 is a given.

Yes....

Stay out of the closet and wait until Christmas, kids. <img src="/ubbthreads/images/graemlins/wink.gif" alt="" />


Things worth waiting for are ... well ... worth the wait.



Dan, thanks for your continued efforts to bring a superior product at an affordable price. <img src="/ubbthreads/images/graemlins/laugh.gif" alt="" /> <img src="/ubbthreads/images/graemlins/laugh.gif" alt="" /> <img src="/ubbthreads/images/graemlins/laugh.gif" alt="" />

Infi or 154CM, I am in for the LE, still deciding on the SR101 version. I will have to see the pics. 154CM would be great for the knife... If it works out that it is Infi all the better.

Regardless of the steel, the S5 will be TOTALLY AWESOME!!! <img src="/ubbthreads/images/graemlins/shocked.gif" alt="" /> <img src="/ubbthreads/images/graemlins/crazy.gif" alt="" /> <img src="/ubbthreads/images/graemlins/shocked.gif" alt="" />

Dan - please BRING IT!!! <img src="/ubbthreads/images/graemlins/thumbup.gif" alt="" /> <img src="/ubbthreads/images/graemlins/thumbup.gif" alt="" /> <img src="/ubbthreads/images/graemlins/grin.gif" alt="" />

Man I think I must have missed something.
Hope everything is settled now.
I think I see a cg model in my future

I'll be buying one of each (finances allowing) as I've searched the Globe for a SS4 without luck...I'm hopeing that the LE is INFI but 154 would also be great. Very excited about the CG though in that beautiful design! Thanks ; )
JB

Agreed. I'd be all over an INFI version. I'd probably also buy an SR101 version (or even an SR77 version). A 154CM version? I'll pass. There's nothing wrong with 154CM, but INFI, SR101, and SR77 are what put these companies on the map and what make these knives what they are.

Agreed! Yes, Dan, bring it pleeeze! <img src="/ubbthreads/images/graemlins/crossfingers.gif" alt="" />

SR101 5" blade + mudders = an excellent knife!!!

i might have to buy a S5CG just bc its going to be the first DOG made of it... i wonder how thick it will be... is this going to be as thick as the S6 or will it be more like the yard keeper?

sr101 is my favorite steel. I am pumped!
thanks
dan

wow I miss everything now! <img src="/ubbthreads/images/graemlins/doh.gif" alt="" /> I had no idea of the "fun" going on!

but it sounds like good stuff is coming! thanks Dan and Company for the great stuff coming out!

Well W/D, I guess you're just going to have to visit us more often! <img src="/ubbthreads/images/graemlins/wink.gif" alt="" /> <img src="/ubbthreads/images/graemlins/grin.gif" alt="" />

When all is said and done, it looks like there will be a fine knife for the dogs in the Yard. I think I will get one I love the idea of a 5 in SR-101, and with the mudder handel and a useable choil, it will be a dream.


And SR-101 is 52100 ball-bearing steel, great stuff, check it out.
http://www.matweb.com/search/DataSheet.aspx?MatGUID=d0b0a51bff894778a97f5b72e7317d85&ckck=1

Dan, sorry to hear the cat got out of the bag early. It does suck when you work on a surprise and it gets ruined.

Now, will have to get both since I need an example of both blades, a CG since it is SR101 and the LE because that is what I have examples of now. I passed my tan SOD to a friend that is a knife conisouer, he would not leave me alone LOL.

bottom line. if its sr77, sr101, or infi (busse kin steels) its going to be one kick [censored] knife. and i dont have one knife with mudder grips... what are the advantages of it over the DMCG grips and the normal res c grips on most other sy knives?

I don;t know what grips are on the CGDM, but I do have the res c. I can tell you that the mudders on my MUK has to be the gripper I have ever held. I hope to get a deer this season and then I will know for sure when there is blood all over the grip.

I hope it is NOT thicker than 3/16" (0.1875"). I might be O.K. with up to .20" (????).

But, 3/16" seems ideal for this knife IMO.

.

Private Klink, how goes it. I haven' been here in a looong time. Seems if all the action is going on over here and at Busse Combat! I like the looks of this new S5 and also the SAR4! When can we expect exact specs for each and prices?

Thanks

For the smaller blades (I have the Mudpuppy and Scrapmuk) the mudder grip has a much more maneuverable feel than the normal Res C. Strange as it may sound, after holding the mudder grip, it makes my DMDC and YK feel small to the hand. After picking up the MudPuppy, I will pretty much by anything with a mudder grip now...

I'm guessing since the LE's don't have a final material yet, this isn't going to hit our hands until fall.

The fan base is definitely for a good reason. To me it is one of if not the most comfortable knife grips I have held...

Please don't say possible is anywhere like soon?

Picky Folks... ain't we???

Heya Everyone,

Sorry I have been gone, glad I have been summoned back. I have been taking a certification course with a very unprofessional and, well, just plain mean instructor. After finishing the course last week Saturday I have been vegging a little and trying to prep for job interviews etc.

Well, my son had different plans. He was born four weeks early this past Friday morning at around 7am. Labor was 7 hours. He was 7lbs and 7oz. He screwed up on his length and missed it by 'that much' at 20". We were totally unprepared, of course (is anyone ever prepared for their first?). We got home today.

The Scrapper 5 looks freaking awesome. I think it looks like a poor mans version of a badger attacks. I love the idea of SR101 on this blade, especially with mudders, the best possible combo.

Toast - Congratulations on your new son!!! <img src="/ubbthreads/images/graemlins/thumbup.gif" alt="" /> <img src="/ubbthreads/images/graemlins/thumbup.gif" alt="" /> <img src="/ubbthreads/images/graemlins/grin.gif" alt="" /> Perhaps you should get an S5 for each of you - something special to mark the occasion! <img src="/ubbthreads/images/graemlins/wink.gif" alt="" />

Congrats Toast!!

Nice to see you back SkunkHunter! <img src="/ubbthreads/images/graemlins/thumbup.gif" alt="" /> This IS the forum to frequent! <img src="/ubbthreads/images/graemlins/thumbup.gif" alt="" /> <img src="/ubbthreads/images/graemlins/thumbup.gif" alt="" /> <img src="/ubbthreads/images/graemlins/grin.gif" alt="" />

Sorry your cat got spoiled, Dan. Wait, that didn't sound right. <img src="/ubbthreads/images/graemlins/crazy.gif" alt="" />


Anyway, I know how it is when someone springs the surprise that you had been planning yourself. But trust me, we were all thoroughly surprised. I know it really blew my hair back.

congrats on your newborn son. train up and child in the he should go and when he is old, he will not depart from it.

what?! started early, i see. eh, it is the Busse way.

i kid, i kid. i'm guessin you were goin for Proverbs 22:6 but the copy and paste didn't work out.

Congratulations, Toast. I'm with RS on the verse.

Sounds like a sweet knife!!! Cant wait for it!!!

Congrats on the newborn toast!!! get ready for lack of sleep! <img src="/ubbthreads/images/graemlins/smile.gif" alt="" />

ive never handled mudders but i hear they are great...most people here are right. <img src="/ubbthreads/images/graemlins/smile.gif" alt="" />

Congrats!

Great! A Boy. <img src="/ubbthreads/images/graemlins/laugh.gif" alt="" /> <img src="/ubbthreads/images/graemlins/laugh.gif" alt="" /> <img src="/ubbthreads/images/graemlins/laugh.gif" alt="" />

I also like 3rd John 1:4

I have no greater joy than to hear that my children walk in truth.

Congrats!

Tuesday is here! Tuesday is here!!

not in hawaii nei! <img src="/ubbthreads/images/graemlins/smile.gif" alt="" />

I am anxious to see Dan's post! <img src="/ubbthreads/images/graemlins/shocked.gif" alt="" /> <img src="/ubbthreads/images/graemlins/crossfingers.gif" alt="" /> <img src="/ubbthreads/images/graemlins/shocked.gif" alt="" />

My customized Recon Scouts are arriving via UPS as well.

Hey there toast,
a late congrats on the new young one!

Awesome!! Jeff is the man! <img src="/ubbthreads/images/graemlins/thumbup.gif" alt="" />

After looking at the Rainwalker sheaths, I am very impressed. He offers a lot of options and the pricing is not too high. I'm sure you will be happy to find some pants for your Night Strider and RAT 4 Bruce. I've never owned a Scrapyard knife yet, but I am really looking forward to this new release. All I've used for fixed blades are Fallknivens, Busse's and some customs. The handles on the Scrapyards look nice and comfortable. And regardless of the blade material, 154 or Infi, both are very nice steels.

I don't know much about SR101 steel, but it sounds like its tough and a lot of you guys like it. So I am sure it will be a nice option. Does it sharpen as easily as 154cm?

Nice, I'd like give an SR101 a whirl then! I gotta hand it to fellas who spend so much time forging steel and finding new more efficient super steels. My dad is a pipefitter and even he is not familiar with SR101 or the mysterious INFI.

I have learned more about tool steel and steel in general hanging out here.

Thanks for the wealth!

Swamp Yard .............Neat I can not wait.

Please post a pre-order thread ASAP.

I really really want one or 5 of these.

9 hours.

INFI, SR-101 and SR-77 are proprietary "NAMES" made up by Jerry. The steels themselves are somewhat (possibly / unknown) proprietary as well.

But, in general:

INFI: is appears to be unique and a (most likely) a true proprietary steel. I have not yet seen any steel that has similar composition to INFI's. Some speculate that is is based on A-8 chipper steel. But, the compositions vary considerably and I don't really see or understand the comparison of INFI to A-8 (?????)

SR-101: is basically "52100" - that is "rumored" to be "modified", but there is no "known" information to support any modifications to the steel composition other than a proprietary heat-treatment.

SR-77: is basically S7 - that is "rumored" to be "modified", but there is no "known" information to support any modifications to the steel composition other than a proprietary heat-treatment.


Most knife-makers and other people knowledgeable about forging and uses for steel will concure that Heat-treatment is a HUGE part of what makes any given steel great for "intended" purposes - whatever those purposes are.

Busse has earned HUGE respect for their ability to make GREAT knife steel and provide "consistantly" great steel. Toughness is VERY high while still providing very good edge properties. <img src="/ubbthreads/images/graemlins/thumbup.gif" alt="" />

.

busse kin have built their reputation as the best in the business for hard use and abuse knives. just the reason i love them <img src="/ubbthreads/images/graemlins/smile.gif" alt="" />

Thanks for all the congratulations. Michael Johnathan Toast (ok, not his real sir name...) has a bit of a yellow tint to him. He has now been stuck with needles every day he has been alive. It looks like its getting better though.

Sleep? What is that? My Dr. prescribed me some sleeping pills two days before The Boy was born (four weeks early). I finally was able to pick them up today.

Congrats on the new addition

Way to go Toast!!!!!
Congrats on the new baby. <img src="/ubbthreads/images/graemlins/thumbup.gif" alt="" /> <img src="/ubbthreads/images/graemlins/thumbup.gif" alt="" /> <img src="/ubbthreads/images/graemlins/grin.gif" alt="" />

By the look of your new pride and joy, you did good. I know I said congrats earlier but the pic makes it even more obvious!

BTW, your son is thinking, "When do I get my SY Blade?" <img src="/ubbthreads/images/graemlins/shocked.gif" alt="" />

Awesome, Toast. You'll never love anyone more in your life than your kid(s).

I think you're right Sumo! <img src="/ubbthreads/images/graemlins/thumbup.gif" alt="" /> <img src="/ubbthreads/images/graemlins/grin.gif" alt="" />

im with Klink on this one <img src="/ubbthreads/images/graemlins/smile.gif" alt="" />

LOL. You are probably correct. I wish we could find a price for these knives so I can sneak some out of the college fund... Though its probably better for me to have some more time to acquire some.

I just want to know when they'll be available to order. I'm getting crazy, waiting to find out when I can out my order in!

Wiseguy! <img src="/ubbthreads/images/graemlins/rolleyes.gif" alt="" />

Congrats on the little one!!

Its all about the scrap and dumpster diving <img src="/ubbthreads/images/graemlins/smile.gif" alt="" /> I haven't come across a rat yet

Dan

Thank you, he is just getting over his jaundice.

He is a good looking little guy. We also had pretty babies. I know that pretty is not a manly word but at this age its okay.

Congrats
Dan

Pretty is ok, a man is comfortable with using words like that and even being senseative!

No pulling of the man card on this one LOL

dan to me it dont matter what it is goning to be made of i would like INFI more but either way i will be buying at leats one if not more depending on the price which by the way does anyone know what the price of the regular no the LE is going to be so i can make some finacial changes that way i can get more if possible

I hope its below $100.00 for the CG so I can order a few <img src="/ubbthreads/images/graemlins/laugh.gif" alt="" />

This is my rifle, and that is my SHTF Busse knife.

There are many like it, but this one is mine!

The few

The proud

The INFI S5

What a slogan!

WANT IT NEED IT BRING IT!!!!!

You know you want some of it

And stay the course! Long live the Yard!!!!!!!!!!!!!!!!!!!!!!!!!

Amen brothers, Amen!

I can wait... I just like knowing what it is. Since I definitely want one, I check back much more frequently.

Bring the blade, bring the blade.

there is no doubt in my mind that i want one of these knives i just hope that it is under 100 so that i can get more than one but if not i will still be happy with my one no matter what. I think that he is just building up the anticipation and so that when he does bring it out that every one will want to buy one

We will see... I hope it drops before blade,, but I doubt it will happen...

Prepare for the best -- next week! <img src="/ubbthreads/images/graemlins/thumbup.gif" alt="" />

Ah boo! Ah Boo! er, it's on its way this week!!! <img src="/ubbthreads/images/graemlins/wink.gif" alt="" /> <img src="/ubbthreads/images/graemlins/grin.gif" alt="" />

The countdown has started!

The nerves REALLY get on edge starting tomorrow! <img src="/ubbthreads/images/graemlins/eek.gif" alt="" /> <img src="/ubbthreads/images/graemlins/crazy.gif" alt="" />

awsome its under a 100 and with color combos that you can make your own cant wait till they drop it its going to be awsome when can we put in our orders
<img src="/ubbthreads/images/graemlins/ooo.gif" alt="" />

that would be awsome for the infi blade but i dont think that i am going to get the LE but i havent decided yet

Really think about it B/C! <img src="/ubbthreads/images/graemlins/eek.gif" alt="" /> You don't want to be sorry later! <img src="/ubbthreads/images/graemlins/rolleyes.gif" alt="" />

If I can swing it I am getting 3 of the CG--me, myself and I! Nah, one for pops, one for my brother and one for myself. When the LE comes out I will get one for myself since I have a LE SOD and MUK.

Way to go Sumo! <img src="/ubbthreads/images/graemlins/thumbup.gif" alt="" /> <img src="/ubbthreads/images/graemlins/wink.gif" alt="" />

Well, I have to call my granddaughter for her birthday, so see ya'll later! <img src="/ubbthreads/images/graemlins/wink.gif" alt="" />

Take care PK

Hey sumo

CG is a sure thing for me. the LE? depends if its the all-mighty INFI. <img src="/ubbthreads/images/graemlins/laugh.gif" alt="" />

hmmmm. the LE. figure it will eventually come out in infi with a price tag of 169. we'll see.

Hell thats fine by me!!!

Hey Big G - you have really racked up some posts! Way to go!! <img src="/ubbthreads/images/graemlins/thumbup.gif" alt="" /> <img src="/ubbthreads/images/graemlins/wink.gif" alt="" />

who me?! <img src="/ubbthreads/images/graemlins/blush.gif" alt="" />

You're closing in fast -- keep going! <img src="/ubbthreads/images/graemlins/thumbup.gif" alt="" /> <img src="/ubbthreads/images/graemlins/wink.gif" alt="" />

ps Tag your it!

Now you! <img src="/ubbthreads/images/graemlins/grin.gif" alt="" />

Where's the referee to call foul when you need him?!

I was thinking the same thing a little while ago! <img src="/ubbthreads/images/graemlins/cool.gif" alt="" />

great minds, klink.

Different ethics! <img src="/ubbthreads/images/graemlins/wink.gif" alt="" />

IM back

Well get busy...I smell success

Come on Dogs help this Dog make JYD status

Very cool

Dan

Dan your everywhere!

Howdy Dan!

See guys - Dan's watching and cheering you on as well! <img src="/ubbthreads/images/graemlins/thumbup.gif" alt="" /> <img src="/ubbthreads/images/graemlins/grin.gif" alt="" />

Yea bourbon releases super powers! and sheets in white satin

The bourbon is for "medicinal purposes"! <img src="/ubbthreads/images/graemlins/grin.gif" alt="" />

Im glad we all suffer from the same disease ....good to know

one bourbon, one scotch, one beer.

no fear!

There you go!

gonn get drunk baby, have no

Sounds good! <img src="/ubbthreads/images/graemlins/grin.gif" alt="" />

One bourbon, one scotch, six beers!