Vex

OK what was the SR vex made from was it D2?

Yep. <img src="/ubbthreads/images/graemlins/grin.gif" alt="" /> <img src="/ubbthreads/images/graemlins/thumbup.gif" alt="" />

The vex is SWEEEEEEEEEEET. <img src="/ubbthreads/images/graemlins/thumbup.gif" alt="" />

The vex is SWEEEEEEEEEEET. +1

The vex is the only EDC I can imagine ever needing...


Unless they make one out of 154CM or INFI <img src="/ubbthreads/images/graemlins/laugh.gif" alt="" />

I got one in the last ganza and it is a fine blade..... so fine it might become my new EDC if I can get some pants for it.

I actually considered selling mine until a couple of weekends ago I played with it on the belt sander and now it is stupid sharp. It aint going anywhere!!!!

its purty D2 also




lol

yea I never did get to see or know much about it, I had a chance to pick one up at the ganza but I passed without any knowledge on it, after seeing K.G.'s pics that looks like the blade I need, my H.C. just never did it for me, I have the 3.5 version. so the Vex is my new quest.

I have a video on my youtube starring the vex. It gives good idea of size and crap..

thanks!

One great knife- it just feels right in your hand <img src="/ubbthreads/images/graemlins/thumbup.gif" alt="" />.You can also get them scary sharp <img src="/ubbthreads/images/graemlins/eek.gif" alt="" />. I don't think they made that many or how many different color scales ? Anybody <img src="/ubbthreads/images/graemlins/confused.gif" alt="" />?

There were quite a varied selection in scales for such a very limited run knife.

There was:
red G10
Black Micarta
Green Micarta
Tan Micarta
White/Black G10
Tan/Black G10

And those are just the ones I've seen pics of!

I've got a Green Micarta scaled Vex and an 18" Ontario machete coming in the mail to me shortly (probably Tuesday). I'm super pumped to check this little blade out after all the talk about it.

Pat - I think you will like the Vex - I sure do! And I normally don't care much for small knives. <img src="/ubbthreads/images/graemlins/crazy.gif" alt="" /> The Vex is a nice size, thin and sharp - a nice slicer. Let us know how you like it! <img src="/ubbthreads/images/graemlins/grin.gif" alt="" />

Will do, Tom.

I'll be flying out to Vancouver for a couple weeks on the 17th, and wouldn't mind taking this one with me as my belt knife while in my CadPats!<img src="/ubbthreads/images/graemlins/grin.gif" alt="" /> I figure I should be able to use either my Muela Rebeco or Rainwalker MPLE sheath for it.

Tan/black, and white/black.

Pics? I always just thought it was tan/black, and it just looked like white/black..

what about G-10 vs the micarta on the vex...one thinner than the other, big weight difference??

I can't help you on the weight variations with different materials, but my linen micarta:

Vexillarius = 5.25 ounces; .14” thick; 3.75” blade (from front of choil); 8.25” oal

It is pretty light-weight for micarta.

And I LOVE that subtle two tone linen.

Thought you might want me to dump my pics here on this thread for you :

I don't usually get good quality pics. But, sometimes get "Lucky".





Various in hand angles:










The Vex was a bargain at $99.00. They seem to be selling on the forums for around $120 - $140.

I wouldn't try to mess around too much. I think that is still a good price. Just figure out the scales you want, keep an eye on the trade forums and do the deal.

There were not enough of these made to mess around.

I hope they make more. As I think MANY people will be wanting this knife over the years and prices will likely go up. Buy now!

I WISH I could have afforded a spare. But, funds are too tight right now for me. <img src="/ubbthreads/images/graemlins/frown.gif" alt="" />


---------------


Borrowed/harvest pic posted by Adrock1978 on Swamp Rat/Bladeforums:

good pic:




.

Hmmmm.... I just noticed it appears I have had the forums all to myself for the last 3 hours or so.

Feels like an empty vacant home (... err Dog-house) somehow now. <img src="/ubbthreads/images/graemlins/frown.gif" alt="" />

I didn't think that happened around here. <img src="/ubbthreads/images/graemlins/confused.gif" alt="" />

I think I will go to bed now. <img src="/ubbthreads/images/graemlins/loopy.gif" alt="" />

.

I just cant wait untill mine shows up.

cant wait for the pants for it to show up...

what color linen is that? looks great.

I think that's green linen; I got a pair of them. A big part of what makes the Vex lighter than most of the Micarta-handled knives are that the handles are slim -- it doesn't fill my hand like a Res-C Mudder. I think they're OK (I like them better than the day I received them) and will hold onto mine, but I don't know that I'll ever choose the to carry one over either an S5 or a BAD.

KnifeGuy, your large hands have me wondering if that is a smaller handle than usual.

WooHoo! I just got my Vex with Green Micarta scales... and love it! This is really a nice little knife! Very cool for small jobs, whittling, EDCing, etc.

[censored], now I wish I had two of these! <img src="/ubbthreads/images/graemlins/crazy.gif" alt="" />

If anyone has a Vex (Especially with Red G10 scales) that they don't like, send it to me.... Seriously! <img src="/ubbthreads/images/graemlins/grin.gif" alt="" />

Like Jim says: I "Think" it is green linen (????) <img src="/ubbthreads/images/graemlins/confused.gif" alt="" />

Whatever it is, it is a VERY nice color IMO. And honestly some of the NICEST handle material I have EVER received from Busse and kin.

I would say it is more black than green and the green isn't bright, but subdued and earthy - kind of a grayish/brownish/green or something. (????).

Anyway, I love it. <img src="/ubbthreads/images/graemlins/thumbup.gif" alt="" />

.

No doubt. Both the tang and scales are slim. I wouldn't call it hand-filling. But, I would call it very erognomic, comfortable and appropriate for this type of knife.

Even with my large hands (not overly thick, but I wear XL gloves), I find the Vex to have a good handle - secure, comfortable and nimble.





.... a subjective choice. Different knives for different needs.

The S5 is significantly larger and more robust in blade. It is more of an all-rounder IMO. Whereas, the Vex is more of a slicer.

The S5 is AMAZINGLY light for offering such a blade. Most Res-C knives offer a lot of bang for the ounces. But, the S5 easily offers the most bang for any Mudder so far and anything short of the S6 which is considerably larger again.

The Vex offers micarta and is still lighter than the S5. It's flat/slim profile, shorter oal and lighter weight should carry better than the S5 - especiall because it is fairly flat and about as good as any lightweight fixed blade EDC.

I have always liked the AD and the BAD is probably even better (satin and thinner), but I still can't stand the sharpening choil and Talon Hole on the BAD/AD. However, I love the AD/BAD's blade shape and I think the handle is comfortable. I just wish Jerry would make the BAD without the sharpening choil and also without the Talon Hole. <img src="/ubbthreads/images/graemlins/crossfingers.gif" alt="" />

But, for anyone who like the AD and mudders, the MPLE is often under-appreciated. <img src="/ubbthreads/images/graemlins/wink.gif" alt="" />

-----------

I think it is hard to compare the S5 to the Vex. I just snapped some pics and lined up the front of the "grip areas" where the front of your index finger would be:

The Vex offers just a hair more grip area and more butt/pommel, but is still quite a bit smaller oal.

If I were to line up the cutting edges, the S5 is still about 0.825" longer at 4.625" cutting edge vs. about 3.8" on the Vex.

Only loosing 0.825" in cutting edge isn't bad considering the Vex is almost 2 inches shorter oal at 8.25" vs. 10.1875. Obviously, the difference is in the choil. But, I would think most people looking for an EDC would choose the VEX.
I don't mind the choil on the S5. It offers multiple hand holds that are reasonably suited for the S5. But, I am VERY glad the Vex does NOT have a choil.




Notice how much slimmer the Vex is:




The handles are obviously different and the mudders are more hand-filling. But, IMO, the VEX is every bit as secure and comfortable to my hands. And should carry WAY smaller - for those looking for a smaller EDC.

.

????? <img src="/ubbthreads/images/graemlins/confused.gif" alt="" /> - I don't know. This is the only one I have (unfortunately! <img src="/ubbthreads/images/graemlins/frown.gif" alt="" /> )


But, I really doubt it. I would think it is reasonable to assume that the Vex handles are all pretty much the same in length. Busse is obviously pretty automated.

Busse scales tend to be CNC cut as well. But, I have seen some thicker or thinner in the past. Maybe their CNC cutter had been set at different heights or they had different thickness in scales blanks or something. Also, something like these Vex scales might have some hand sanding/finishing (?????) Hard to know. Jerry never says. <img src="/ubbthreads/images/graemlins/rolleyes.gif" alt="" />

The RMD micarta vs. G10 were significantly different. I doubt the Vex scales had that much variance though (????).

I do have large hands. But, the VEX "Does" fit and feel great in my hands. <img src="/ubbthreads/images/graemlins/thumbup.gif" alt="" />

See the pics above and notice the Vex actually has a bit more handle "Grip area" length than the mudders. But, both work fine for me... err normally.

All of my other mudders feel fine. But, I have ground the forward nub of Res-C bump at the guard to flow into the metal part of the guard. Effectively transitioning two bump/guards into one. Which also increased my grip area on one of my S5 (not shown yet <img src="/ubbthreads/images/graemlins/wink.gif" alt="" />) by about 1/4" more grip area. The modification also rounded that Res-C bump that was annoying me on the S5 - never bothered me on other Mudder handles. <img src="/ubbthreads/images/graemlins/confused.gif" alt="" />

My modified S5 is more roomy and significantly more comfortable. And it also balances better IMO. <img src="/ubbthreads/images/graemlins/thumbup.gif" alt="" />

I will show it when mods are more complete. I just haven't been able to do much with it lately.

.

Congrats!... I've been sayin'. <img src="/ubbthreads/images/graemlins/wink.gif" alt="" />

And if you check some of the various Busse and kin forums, a LOT of people are raving about the Vex. <img src="/ubbthreads/images/graemlins/thumbup.gif" alt="" />

It was a sleeper that is WAKING UP! <img src="/ubbthreads/images/graemlins/ooo.gif" alt="" />

I wish I had a spare as well. <img src="/ubbthreads/images/graemlins/frown.gif" alt="" /> But, I would take another of these linens. <img src="/ubbthreads/images/graemlins/thumbup.gif" alt="" /> <img src="/ubbthreads/images/graemlins/thumbup.gif" alt="" /> <img src="/ubbthreads/images/graemlins/bowdown.gif" alt="" /> <img src="/ubbthreads/images/graemlins/bowdown.gif" alt="" />

.

Glad to hear you like it! <img src="/ubbthreads/images/graemlins/thumbup.gif" alt="" /> <img src="/ubbthreads/images/graemlins/grin.gif" alt="" />

Man I really like that green linen.




I gotta be faster with the send button next time!!






(I really like my black micarta too. Once it is covered in deer blood, I'll never know the difference anyway.)

Vex love! I think I love it because it is so light and nimble but still feels SOLID. That and the gorgeous tan micarta. I had said tan and black in my email thinking it was a combo but Amy-O explained it was either or. I got the tan by chance and was in awe of not only the looks but the feel as well. A friend of mine who doesn't know much about knives thought it was wood. I hope they put out more, people don't know what they're missing out on. Especially at that price.

i really like my vex.... it seams like a pretty good slicer ... still deciding if i wanna make it a user....

Yep, it's definitely green linen. I didn't remember brown in mine, but I just unwrapped one to check and it's there. Indoor lighting made mine appear darker, but they'd look the same under strong natural light.

I like those comparison pics, I found me a Vex on the exchange!!

My Vex arrived today and I am lovin it. What a beauty and what a nice size for EDC.

Congrats!

congrats , what color are the handles?

heh i went for od green off the bat...

Great looking knife. <img src="/ubbthreads/images/graemlins/ooo.gif" alt="" />

Those are the tan canvas micarta scales. I love the texture of the grip and what a nice convex grind on that blade! Gonna have to decide what kind of pants to get for the little beauty...

g10 looks nice and all but my fav is still the feel of micarta and for some reason im drawn to greens.....

hope your going to have some fun with it...... mines a safe queen at the moment cause im playing with other ones.... and i also picked up a hack

[censored]. I'm kicking myself. I had the opportunity to get one from the Ganza. Got the DDF but didn't have the extra scratch for the Vex. Looks like a really useful size and shape. Nice simple lines. Canvas micarta is my favorite handle too. Should have grabbed a tan one and double sheathed it with the DDF.

Ooooh. That was my first thought when they arrived. What a piggyback combo that would make.