Busse Basic line? B-11?

It looks like there's scuttlebutt on the Busse forum about the B 11 on the horizon...an 11 inch blade of infi w/ Res-C handles.

Does anyone here have a Basic 9 and a DF? If so, how do the handles compare? The Basic line look a little smaller to me.

basic handles are known for being cramped. gravelface once posted a good comparison pic of the basic, the df, and the battle rat. try a search for his thread.

cool...thanks for the lead, Mag. I'll search for his post.

I just had a look at my Basic 7 (smooth coat version) and my S6. The handle length and general contours are pretty much identical. However the S6 handle seems a fraction fatter so would probably suit big hands better.

IF Jerry does do another Basic of pretty much any kind, WOOP! I'm all over that! INFI with good handles? Nice!

I'm pretty new to the World Of Busse, but it seems a bit of a stretch to think that thread is a hint about the release of a new Basic 11.

Just in case anyone want to proxy one for me at Blade?

Skorp...did you notice Jerry's comments in the thread?

This seems to be an interesting response to the cries for a res-c handled chopper. I think it has the potential to be awesomeness....but I hope they thin it out like the BWM, down below .2. Reading the threads on BF, it sounds like the Basic series were approximately .25. I'd have to weigh the options against my BWM if that was the case...and depending if they become available in store, I may wait to learn the final weight of the delivered product before making up my mind. If they bring it thinner, and with an Asymmetric grind....I'll eat it up.

Yes Ish I saw the thread from the beginning, My instinct tells me He's just going with the flow and having a little fun playing with our heads.. I'm sure you've seen the Muk thread over there.

But, the wisdom of some of the old hogs may be right on. I hope so as I think it would be a great blade.

Hear that Dan, If your Bro's just tweaking us a little I think a Bigdog Father might be the ultimate. In orange res-c of course

Ahhh, I see what you mean. It can get so confusing sometimes...its anyone's best guess really. Considering the Cisaba statements, I'm betting on it <img src="/ubbthreads/images/graemlins/laugh.gif" alt="" /> <img src="/ubbthreads/images/graemlins/2weeks.gif" alt="" />

Speculating a bit further, I'm thinking if Jerry is hinting at A BASIC, I believe that it will be in the medium range. Likely a 5.5-6.5 inch blade. His new plan was supposed to have small medium and large blades available at the same time. He has the BWM out now, 10", large. The Boss Street, 4.25", small. So a medium is needed.

The 11" came from analysis that because there were 11 melons in the picture it was code for an 11" knife. Very creative of Jerry if this is true and very perceptive of the Hogs to cypher this. I would be very impressed.

Now if you factor in the SAR-3 into this scenario would this now mean that the Boss Street would be bumped into the medium class. If so all bets are off. The B-11 will be unveiled in a little more than 2 weeks at Blade. My brain hurts now and 4am comes early. Goodnight.

Sleep well Skorp.

Well, the BWM and Street have been up for some time. Although I'd love to see a thin, satin BOSS....it would rather interesting to see Jerry come out with a full line of Basics. Basic 5; Basic 7; Basic 11 (small, medium, large). Wow, that would be an interesting to see up on the store-front <img src="/ubbthreads/images/graemlins/crazy.gif" alt="" />

It's always interesting to see ANY new Bussekin steel! <img src="/ubbthreads/images/graemlins/wink.gif" alt="" />

Yes, that is a big factor is it 100% original honest INFI? or Modified-INFI like the past Basic line?

sweet I didn't see that.

I'm SO confused! <img src="/ubbthreads/images/graemlins/eek.gif" alt="" /> <img src="/ubbthreads/images/graemlins/crazy.gif" alt="" /> <img src="/ubbthreads/images/graemlins/doh.gif" alt="" />......................................... <img src="/ubbthreads/images/graemlins/grin.gif" alt="" />

I'm also willing to bet the handle will be more like the DF handles then the older Basic handles.

This could be the chopper to rule all choppers. <img src="/ubbthreads/images/graemlins/laugh.gif" alt="" />

If it has the handles of the DF, a larger and longer blade and of SR77, 101, or Infi I want it.

I'm guessing the same. They will utilize the newer style handles, and all will be right in the world <img src="/ubbthreads/images/graemlins/bowdown.gif" alt="" />

What would you consider "affordable" for 11 inches of INFI with Res-C?

$250-ish?

Wouldn't it be nice if Jerry finally gave up on the crappy micarta and embraced res-C!? <img src="/ubbthreads/images/graemlins/wink.gif" alt="" />

IF there is an INFI Basic 11, will it come with the superb 'Basic' kydex sheath? That would be nice...

I can't see a Basic not having Jerry's name on it myself. At 11" it's got to be $300 to $350 or even worse.. Now factor in exchange rates, international shipping and the Customs 'ransom' I get hit with and it'll really sting.

I don't think Jerry should go back to Res C. I think he should give INFI to SYKCO! Gimme an INFI DFLE! <img src="/ubbthreads/images/graemlins/grin.gif" alt="" />

My heart stopped for a bit.

I'm all over that! <img src="/ubbthreads/images/graemlins/laugh.gif" alt="" />

+1 <img src="/ubbthreads/images/graemlins/thumbup.gif" alt="" /> You have SOOOO much wisdom HD!!!

Awesome idea <img src="/ubbthreads/images/graemlins/thumbup.gif" alt="" />

Amen brother! INFI SOD too anyone? <img src="/ubbthreads/images/graemlins/laugh.gif" alt="" /> <img src="/ubbthreads/images/graemlins/thumbup.gif" alt="" />

(Dan I still love your sr77 steel too!)

An INFI DFLE or SOD sound good to me!!! <img src="/ubbthreads/images/graemlins/cool.gif" alt="" /> <img src="/ubbthreads/images/graemlins/cool.gif" alt="" />

I'm excited about the Basic 11 too!!!!!!!!!!!!!!!!!!!!!! <img src="/ubbthreads/images/graemlins/ooo.gif" alt="" /> <img src="/ubbthreads/images/graemlins/ooo.gif" alt="" /> <img src="/ubbthreads/images/graemlins/ooo.gif" alt="" /> <img src="/ubbthreads/images/graemlins/ooo.gif" alt="" /> <img src="/ubbthreads/images/graemlins/ooo.gif" alt="" /> <img src="/ubbthreads/images/graemlins/ooo.gif" alt="" /> <img src="/ubbthreads/images/graemlins/thumbup.gif" alt="" /> <img src="/ubbthreads/images/graemlins/thumbup.gif" alt="" /> <img src="/ubbthreads/images/graemlins/thumbup.gif" alt="" /> <img src="/ubbthreads/images/graemlins/thumbup.gif" alt="" /> <img src="/ubbthreads/images/graemlins/thumbup.gif" alt="" />

Do you think this one will be at blade?

My only concern is the 11 bit... I never use my DFCG outside of my house or garden due to it's size and weight, so the B11 may also be a 'white elephant' for me! When I chop I tend to use Cold Steel machete's (sorry!) lightweight, cheap, cheerful and tough. <img src="/ubbthreads/images/graemlins/paperbag.gif" alt="" />

It'll be interesting to see if Jerry does do the B11 and if he does whether he'll do smaller more versatile B's in future.

I certainly hope so! <img src="/ubbthreads/images/graemlins/wink.gif" alt="" /> <img src="/ubbthreads/images/graemlins/crossfingers.gif" alt="" /> <img src="/ubbthreads/images/graemlins/crossfingers.gif" alt="" /> <img src="/ubbthreads/images/graemlins/crossfingers.gif" alt="" /> <img src="/ubbthreads/images/graemlins/crossfingers.gif" alt="" /> <img src="/ubbthreads/images/graemlins/crossfingers.gif" alt="" /> <img src="/ubbthreads/images/graemlins/crossfingers.gif" alt="" /> <img src="/ubbthreads/images/graemlins/crossfingers.gif" alt="" /> <img src="/ubbthreads/images/graemlins/crossfingers.gif" alt="" /> <img src="/ubbthreads/images/graemlins/crossfingers.gif" alt="" /> <img src="/ubbthreads/images/graemlins/crossfingers.gif" alt="" /> <img src="/ubbthreads/images/graemlins/crossfingers.gif" alt="" /> <img src="/ubbthreads/images/graemlins/crossfingers.gif" alt="" /> <img src="/ubbthreads/images/graemlins/crossfingers.gif" alt="" /> <img src="/ubbthreads/images/graemlins/crossfingers.gif" alt="" />

I am hoping that it will be available other than just at the show.

The Basic 11 will be a great chopper ....

Here is a pic of a Basic 9 and the DFLE where you can compare the handle size ...



If the Basic 11 has an ASM grind edge it will be fantastic .... one of the best uses of "Infi" ever IMO ....

<img src="/ubbthreads/images/graemlins/bowdown.gif" alt="" /> <img src="/ubbthreads/images/graemlins/bowdown.gif" alt="" /> <img src="/ubbthreads/images/graemlins/bowdown.gif" alt="" /> <img src="/ubbthreads/images/graemlins/bowdown.gif" alt="" /> <img src="/ubbthreads/images/graemlins/ooo.gif" alt="" />

infi SOD!!!! YES PLEASE!!!

Now that's a mouthful. had to sound it out to pronounce it, lol

Well, according to recent posts on bf I may have to eat my words on being skeptical about Jerry's posts alluding to the release of a basic 11. Congrats to the hogs that cyphered the code. Since he's giving out shop credits there must be something to it.

I would rather that it had been a scrapyard model of that size, but maybe there will be a surprise from scrap yard as well.

So, it'll basically be an overpriced, oversized DF? <img src="/ubbthreads/images/graemlins/laugh.gif" alt="" />

The DF isn't INFI

Hence the overpriced.. <img src="/ubbthreads/images/graemlins/wink.gif" alt="" />

If you payed the original price for the DFCG, which are now pretty much only available at 2x the price, it may not be that bad of a deal.

A Basic 11 will definately be worth the price. As a collector's investment or as a "user" ...

Collector's are likely to double their money .... so buy two and sell one down the line and you have one for free ....

User's get a knife which will keep pace with a NMFBM and yet is lighter and if it comes with an ASM edge will be much easier to maintain in the field ....oh .... and it will be a lot cheaper than a NMFBM.

If you pitch a B11 against a CGDF on a "user" basis ... the B11 will have better edge retention and is likely to out chop it .... but possibly not by a lot ....

If you already have a CGDF and see no need for another large knife .... well done .... you have this knife "addiction" thing beaten and in fairness both will do whatever you need them to .... so you are right <img src="/ubbthreads/images/graemlins/thumbup.gif" alt="" />

But...But...SF is where the Zombie invasion is likely to start!!! I beg you to re-think your position, Bruce...for your family <img src="/ubbthreads/images/graemlins/laugh.gif" alt="" />

I'm still waiting on specs...but I am pretty certain I gotta have one <img src="/ubbthreads/images/graemlins/grin.gif" alt="" />

I'm just hoping it's thin on the same line as the BWM...with a newer, slightly larger Res-C handle. Smooth coat & Asymmetrical grind wouldn't hurt either!

I will say, that the BWM has yet to be sharpened and has been hacking my tree down with no issues...not an easy task considering it's hardened, dry wood. It has made me a believer!

Now that Jerry just announced the Killa Zilla for Blade, I'm really hoping the B-11 is a Scrapyard release of some sort! I can dream, right? <img src="/ubbthreads/images/graemlins/crossfingers.gif" alt="" />

Californian zombies will be too chilled out to eat brains, just throw 'em a beer!

A Basic 11 in case you get out-of-state visitor zombies is a good idea however..

I can't see the B11 not being Busse Combat, but here's hoping!

So a Killa Zilla will make a showing. Would love a Dog or Rat in that shape for sure.

Bruce what I would like to see is a kukri, axe, sword, 13" chopper, and a 154cm of the SS4 even though I have a SS4 now. I think I would be in Dog Heaven!

Well there looks to be some truth to the B11 Rumor...

http://www.bladeforums.com/forums/showthread.php?t=745241

I think I can pass on the KZ2, but the B11 and TG7 sure sound interesting! <img src="/ubbthreads/images/graemlins/grin.gif" alt="" /> <img src="/ubbthreads/images/graemlins/thumbup.gif" alt="" />

Agreed! I haven't seen a TG7 "in-hand" pic...but it looks like the Boss Jack with double guards and a flared handle. Very interested to see it.

The Gladius and KZ2 are no-go for me.

I'm still holding out for the SYKCO release! Bring it Dan!!

[color:"#666666"]SS4...SS4...SS4...SS4...SS4...SS4...SS4...SS4 [/color]

Id sure love to a SS4.

If Dan raids the scrap pile....does that mean the resurgence of the basic line has been planned for years? I mean where did the Res c handles come from if not from the Res C dumpster? Which came first? I am so confused!