Scrap Yard Discussion Forums

Previous Thread
Next Thread
Print Thread
Page 1 of 20 1 2 3 19 20
TNT-15 Sword . . . . Specs And Pricing #1053181 06/22/21 10:36 AM
Joined: Sep 2006
Posts: 6,659
Dumpster Dan Offline OP
Junk Yard Dog
OP Offline
Junk Yard Dog
Joined: Sep 2006
Posts: 6,659


Coming this Thursday June 24, 2021 at 9:00PM Eastern



Here's proof that you CAN teach an old dog new tricks.

Scrap Yard Knives is proud to introduce "The New Trick 15" (TNT-15).


The TNT-15 has a Shallow Hollow Bevel featuring our patented CBT (Corrugated Bevel Technology) which allows for more clearance behind the edge.

Our Resiprene C handles have a proven track record of over 23 years with no end in sight! Resiprene C is well known for its high durability, shock-absorbing, and slip-resistant qualities.

The TNT-15 weighs in at approx. 23.9 oz.

The oval handle has flats on top and bottom which assist in edge indexing in all conditions.

We have priced the TNT-15 at a ridiculously low price that is guaranteed to go up!

Long live the brotherhood of the Yard,

Dumpster Dan



TNT-15 Specs and Pricing:


Specs:

Blade Length: Approx. 15"
Blade Width At Center Of Blade: Approx. 1.28"
Overall Length: Approx. 22.5"
Thickness: Approx. 1/4" (.250)
Steel: SR-101
Hardness: 58-60 Rc
Handle Material: Resiprene C
Bevel: Shallow Hollow CBT
Weight: Approx. 23.9 oz.


Pricing:

Coated: Regular Price: $278.95 . . . . . . First Run Special Offer: $268.95 . . . . You Save $10.00


Raw Dog Finish: Regular Price: $298.95 . . . . . . . First Run Special Offer: $278.95 . . . You save $20.00




Raw Dog Finish


[Linked Image from photos.smugmug.com]




Coated

[Linked Image from photos.smugmug.com]

Re: TNT-15 Sword . . . . Specs And Pricing [Re: Dumpster Dan] #1053182 06/22/21 10:46 AM
Joined: Mar 2010
Posts: 2,156
M
Massive Metal Offline
Junk Yard Dog
Offline
Junk Yard Dog
M
Joined: Mar 2010
Posts: 2,156
Dan

Great Price Thank You!

Also do you know where about the balance point is?

Thanks

MM

Last edited by Massive Metal; 06/22/21 11:00 AM.
Re: TNT-15 Sword . . . . Specs And Pricing [Re: Dumpster Dan] #1053183 06/22/21 11:09 AM
Joined: Oct 2020
Posts: 1,241
Twoody88 Online Content
Junk Yard Dog
Online Content
Junk Yard Dog
Joined: Oct 2020
Posts: 1,241
Raw dog finish. Pure genious !!!


TNTwoody88
JYD #197
Re: TNT-15 Sword . . . . Specs And Pricing [Re: Dumpster Dan] #1053184 06/22/21 11:12 AM
Joined: Oct 2020
Posts: 1,241
Twoody88 Online Content
Junk Yard Dog
Online Content
Junk Yard Dog
Joined: Oct 2020
Posts: 1,241
And dirty dog coated


TNTwoody88
JYD #197
Re: TNT-15 Sword . . . . Specs And Pricing [Re: Dumpster Dan] #1053185 06/22/21 11:14 AM
Joined: Oct 2006
Posts: 1,424
David Brown Offline
Junk Yard Dog
Offline
Junk Yard Dog
Joined: Oct 2006
Posts: 1,424
Can we bring back the red coating for this one please smile


David Brown Looking for #83 S5LE www.buybrownholsters.com azgunnut@earthlink.net
Re: TNT-15 Sword . . . . Specs And Pricing [Re: Dumpster Dan] #1053186 06/22/21 11:25 AM
Joined: Mar 2010
Posts: 2,156
M
Massive Metal Offline
Junk Yard Dog
Offline
Junk Yard Dog
M
Joined: Mar 2010
Posts: 2,156
Good call David!

I wouln't mind Sage/Tan handle or Sage/Green handle combo

Still buying a couple Raw Dog n maybe a ninja


MM

Last edited by Massive Metal; 06/22/21 11:32 AM.
Re: TNT-15 Sword . . . . Specs And Pricing [Re: Dumpster Dan] #1053187 06/22/21 12:20 PM
Joined: Oct 2008
Posts: 114,437
SkunkHunter Online Content
Junk Yard Dog
Online Content
Junk Yard Dog
Joined: Oct 2008
Posts: 114,437
Yup! Any color handles besides black would be nice. Personally I wouldn’t mind a Grey or OD Green handle with a nice natural or forced patina on the blade. Thought about black on black, but would just like a nice natural aged (and yes, or forced) look.

But I do wish it were 3/16 inch thick though, just for a little faster responding blade. That being said, I’M IN!

Last edited by SkunkHunter; 06/22/21 12:20 PM.

DUCIT AMOR PATRIAE
(Love of Country Leads Me)
JYD#105
Re: TNT-15 Sword . . . . Specs And Pricing [Re: Dumpster Dan] #1053189 06/22/21 12:34 PM
Joined: Oct 2008
Posts: 114,437
SkunkHunter Online Content
Junk Yard Dog
Online Content
Junk Yard Dog
Joined: Oct 2008
Posts: 114,437
Specs have been added to the Knife Specs Thread.


DUCIT AMOR PATRIAE
(Love of Country Leads Me)
JYD#105
Re: TNT-15 Sword . . . . Specs And Pricing [Re: Dumpster Dan] #1053190 06/22/21 12:51 PM
Joined: May 2008
Posts: 4,059
RN Online Content
Junk Yard Dog
Online Content
Junk Yard Dog
Joined: May 2008
Posts: 4,059
Very similar to the rucki...


JYD #109
"I came here for the knives and stayed for the people."
Re: TNT-15 Sword . . . . Specs And Pricing [Re: SkunkHunter] #1053193 06/22/21 01:35 PM
Joined: Sep 2006
Posts: 6,659
Dumpster Dan Offline OP
Junk Yard Dog
OP Offline
Junk Yard Dog
Joined: Sep 2006
Posts: 6,659
Originally Posted by SkunkHunter
Yup! Any color handles besides black would be nice. Personally I wouldn’t mind a Grey or OD Green handle with a nice natural or forced patina on the blade. Thought about black on black, but would just like a nice natural aged (and yes, or forced) look.

But I do wish it were 3/16 inch thick though, just for a little faster responding blade. That being said, I’M IN!


Go to Arizona Custom Knives and check out all of the expensive custom wakis and katanas and you will see that .250" is one of the thinnest thicknesses being used.

Once you hold one of these you will see WHY we used the more expensive steel thickness (.250) and ate the increase in machining time!

I wish we had used 3/16 inch thick steel also for the increase in profit margin alone. But the TNT-15 is a pure bred sword and we went with what worked the best.

When this beast hits as hard as it can hit, you're gonna fall in love with Resiprene C all over again!

Long live the brotherhood of the yard,

Dumpster Dan

Re: TNT-15 Sword . . . . Specs And Pricing [Re: Massive Metal] #1053194 06/22/21 01:42 PM
Joined: Sep 2006
Posts: 6,659
Dumpster Dan Offline OP
Junk Yard Dog
OP Offline
Junk Yard Dog
Joined: Sep 2006
Posts: 6,659
Originally Posted by Massive Metal
Dan

Great Price Thank You!

Also do you know where about the balance point is?

Thanks

MM


The balance point is approx. 2 3/4" in front of handle.

Dumpster Dan

Re: TNT-15 Sword . . . . Specs And Pricing [Re: Dumpster Dan] #1053195 06/22/21 01:52 PM
Joined: Mar 2010
Posts: 2,156
M
Massive Metal Offline
Junk Yard Dog
Offline
Junk Yard Dog
M
Joined: Mar 2010
Posts: 2,156
Originally Posted by Dumpster Dan
Originally Posted by Massive Metal
Dan

Great Price Thank You!

Also do you know where about the balance point is?

Thanks

MM


The balance point is approx. 2 3/4" in front of handle.

Dumpster Dan


Thanks!

MM

Page 1 of 20 1 2 3 19 20

Powered by UBB.threads™ PHP Forum Software 7.7.3