Dan Here's a list of wants...nay, requirements !

Dan
Glad you're back in action! Heres a list of steel I need, er require...

1) Scrap Ax ( a Res-c Camp ax or Hatchet would Rule!)
2) El Muk ( I can't believe it hasn't happened yet!)
3) Dog DSF ( DSF Blade Res-C handle...Nice!)
4) A Scrap P'Kal! Yep that's right! (don't worry about Architect rolling his eyes ) An Urban P'kal with a mudder handle would be totally sweet. In these crazy times we all need a friend with us at all times.

The other Dogs can chime in with their steel needs.

MM

Hey MM, sent ya a PM.

DSF or Dog Jack

Actually, how about a comp finish War Dog

I'm with Ishikawa. I'd like to see some type of return to Texas.

El Muk
Yard Hawk

Would be sweet

Weeeeeeeeeeeeell,
4)I don´t do street fighting that often, so the P'Kal wouldn´t be for me.
3) Are there any photoshop crations on how somthing like that would look like?
2) Same goes for this one
1)Axe/Hatchet/Hawk would be cool!

-> I´d love the Kukri!

Busse wont do a design if someone posts a photoshop or drawing online.

And it's a violation of rule #10.

True that! Sorry - and there are photos of existing knifes where I just have to imagine to take the handle of one nd put it behind the blade of another?

Pretty much!

Example Desert Storm fighter with a Res-C handle...which would be sweeeet! And since the Ganza is over...

Architect steps into thread ...

reads list and sees P'Kal ...

rolls eyes and leaves.

I know you would be the first to but Architect. You aren't fooling anyone.

Lol! I knew it!

MM

You're SO right! Everyone knows the he just LOVES the KARAMBIT above all other knife styles!

Arch IS a Ninja! I'm just a wanna be Ninja

No one has any other requirements for Dan?!

MM

Yes, something BIG with a Deregulator handle.

The Deregulator handle is my favorite handle. I know Old Man Klink is always pushing for the Basic handle, but the deregulator is big and comfy

MM

Yes please! BIG....

You know, a scizzy with the reg/dereg handle wouldn't be to bad.

I wonder why we haven't had a scrap rucki yet? It could be like the Rodent Rucki but with Res-C, a real pig sticker! I know Dan had discussed "torque" befor, but if a 1311 can have Res-c then a scrap ruck could

MM

If I remember right, it was more due to the LENGTH of the Res-C.

You know, if Dan was to make the Regulator handle about half again as long as it is now and put it on a scizzy AND secure the handle with three hollow rivets it would be an instant success!

Parang?

Yes! Like the one from Rick Marchand Vic used in the chop off a couple years ago. With res c, fuhgettaaboutit!

Hunting seasons around the corner. How about something thin and slicey. Maybe elmax. And im on board for a scrap ax/hawk.

I think in a very limited run (or even a spesh edition for the dogs that want them :)) a Pikal would be sweet! I carried a Hibben Karambit for a while until a State Patrolman said he felt the pressure point spikes qualified as brass knuckles. I could use another GTFOM knife for everyday carry. Something with a ring would be ideal for me, but I know it's not part of the original design.

The emerson karambits (I really like the Combat) don't have the spikes. Yes they are folders, but that wave feature has them open when they exit your pocket. PLUS it you go for the fixed it fits in a jeans pocket real nice and the back of the kydex sheath will "Hook" on your pocket (Well it does mine) and only the knife comes out of the pocket.

I've been eyeballing the Emerson, but the price... I shudder at carrying EDC a knife that expensive, I couldn't forgive myself for losing something that pricey... Sadly, I tried a few Bud K Offerings... they've got plenty of company in the box they're in right now.

I've also heard (but in the past, haven't checked them lately) FOX USA karambits are pretty good. Also the 511 karambits are nice.

I think the Fox Karambits are made under license, since Emerson patented the "Wave". Kinda like buying a Ford instead of a Lincoln

Didn't even know 5.11 made a karambit. I carried a 2-1/2" blade of theirs that was discontinued for about 4 years. It worked beautifully, althought with the abuse I put it through, screws and rivets started coming out, haha. held up very well until I replaced it though.

Don't know if 511 still makes it or not but it can be found quite often. Just check their sight. It has a really good reputation, a lot of good words about it. Taranti (?) designed it.

Yeah, I just finished browsing. That specific blade ran 150-ish. They have 4 offerings on the website now. It appears LE is starting to realize how useful of a code black weapon they can be.

here's my thinking on knives intended for defense/fighting:

As long as it holds up to basic wear and tear, a 25$ Karambit works just as well as a 200$ Karambit when the only thing you're going to be cutting with it is a bad guy...

Although I'd kill for a War Boar...

I USED to feel the same way about the war boar. Then I figured out it was WAY (Well at least for me) to thick. Other than that, Yeah I would really like to have one.

I want to get the emerson Super Karambit and then My K-bit lust MIGHT be sated. Unless I decide I really need a Ghost II from Bark River.

Oops, I think we hijacked this thread! SORRY. Lets go somewhere else. Maybe the Death Chat.

You just made yet ANOTHER government list!

Yeah, good thing My LIST of all the lists I'm on storage device is a 1 terabyte hard drive!

Your government loves you.

Oh I LOVE my Government.

And I DO LOVE my COUNTRY!

Hooah! 'Merica!

How about a re-release of the wiener dog with elmax steel.

Or an 8" bladed Elmax kitchen knife!

A DSF could be used in the kitchen...


MM

I think the yard could make incredible chef's knives out of Elmax, I would buy one for sure.

I'd imagine you could use the WarDog handle w/ about 7-8" long and 2" wide wide blade with belly for days……..

Like I said before, take the Scizzy blade and lengthen it to 18 inches to the guard. Put a regulator handle (half again as long as it is now) on it, secured with two to three rivet tubes and let the guard slip up into the end of it. Oh and make it about 3/16 inch to 1/4 inch wider (spine to edge). And that would give you THE RESIZZY!

RESIZZY RESIZZY RESIZZY RESIZZY RESIZZY RESIZZY RESIZZY RESIZZY
RESIZZY RESIZZY RESIZZY RESIZZY RESIZZY RESIZZY RESIZZY RESIZZY
RESIZZY RESIZZY RESIZZY RESIZZY RESIZZY RESIZZY RESIZZY RESIZZY
RESIZZY RESIZZY RESIZZY RESIZZY RESIZZY RESIZZY RESIZZY RESIZZY
RESIZZY RESIZZY RESIZZY RESIZZY RESIZZY RESIZZY RESIZZY RESIZZY
RESIZZY RESIZZY RESIZZY RESIZZY RESIZZY RESIZZY RESIZZY RESIZZY
RESIZZY RESIZZY RESIZZY RESIZZY RESIZZY RESIZZY RESIZZY RESIZZY
RESIZZY RESIZZY RESIZZY RESIZZY RESIZZY RESIZZY RESIZZY RESIZZY

I learned this from the Squirrel.

I'd go for any large blade with a Regulator handle on it.

That's two votes! Do I hear more?

You know with the coming Zombieclipse this would make a PERFECT CQB blade, not to mention a killer (pun intended) backup. AND it would be the greatest ONE MILLION POST Celebratory blade!

If we can get the Squirrel on board, it's a sure thing. Cause we all know how much Dan Loves Squirrels, he would do anything for them.