Thanks. That was my first.


I have done a second one. I went ahead and removed the Res-C to get a full satin polish properly on the Ricasso on the second one.

Most of the mods on the second one are similar to what I did on the first. However, I dropped the point on the first a bit and just slightly shallowed out the edges belly. On the second, I left the factory blade shape and just reprofiled the edge, spine, choil and finish.

The pics are prior to the Flared tube being put back on. I had somebody else flare the tube back on as I don't have a proper vice to flare the tube as it should be done - Or I would have done mine properly and a few others properly as well.

Unfortunately, the second isn't mine. The second ones end finish is a bit nicer than mine since I removed the Res-C to get the finish properly done. Plus, I purchased some better finishing belts prior to the second one.

This is a SHARP cutting tool. <img src="/ubbthreads/images/graemlins/wink.gif" alt="" /> - I LOVE SR-101! <img src="/ubbthreads/images/graemlins/thumbup.gif" alt="" />









.