Ontario knife company
#15434
01/30/07 08:58 PM
|
Anonymous
Unregistered
|
Anonymous
Unregistered
|
Anyone here ever try out anything from Ontario knife company? Specifically their R.A.T. 5 or 7? may be a better option for me as a working knife as I dont have to play "THE SHELL GAME" on wheter or not the scrapper 6 will be available again. Cause I might or might not be sitting on my computer when they go up for sale.
|
|
|
Re: Ontario knife company
#15435
01/30/07 09:08 PM
|
Joined: Sep 2006
Posts: 4,489
Paul the Brit'
Junk Yard Dog
|
Junk Yard Dog
Joined: Sep 2006
Posts: 4,489 |
I've got an Ontario Spec-Plus Navy.. Supposedly 440A but it rusts like 1095! I wouldn't buy Ontario again, wait for the Scrapper 6! Did I mention it (Navy) was prone to small chips off the edge in moderate use?
In fairness I can't comment on the Rat 7 having not used one but they have reviewed well in a couple of British gun mags.. But they weren't Cliff Stamp'd!
JYD #3 Poor, but still dreaming of a sage and black SOD CG...
|
|
|
Re: Ontario knife company
#15436
01/30/07 09:10 PM
|
Joined: Jan 2007
Posts: 2,885
scrappy
Junk Yard Dog
|
Junk Yard Dog
Joined: Jan 2007
Posts: 2,885 |
I own a rat 7. it is pretty nice. Unfortunatly i have not done any heavy work with it, however, it does cut well enough. I prefer to do my heavy work with my machete survival (not a machete but a knife) from ontario. I know there are alot of people who will have something to say about that.
|
|
|
Re: Ontario knife company
[Re: Paul the Brit']
#15437
01/30/07 09:24 PM
|
Anonymous
Unregistered
|
Anonymous
Unregistered
|
I've got an Ontario Spec-Plus Navy.. Supposedly 440A but it rusts like 1095! I wouldn't buy Ontario again, wait for the Scrapper 6! Did I mention it (Navy) was prone to small chips off the edge in moderate use?
In fairness I can't comment on the Rat 7 having not used one but they have reviewed well in a couple of British gun mags.. But they weren't Cliff Stamp'd! I like RUST!!!!!!! May be coincidence, but I have better luck with knives taking and holding an edge that have high enough carbon content to rust. I am just leery of the scrapper6 even becoming available again as my emmail hasn't been returned, nor anything posted in these forums about a definite timeframe. BTW what is "Cliff Stamped" Will b e using this blade HEAVILY for pelvis splitting while cleaning deer and utility use around the ranch. What was chipping? the finish? or the steel. 440 steel is [censored] IMHO
|
|
|
Re: Ontario knife company
#15438
01/30/07 09:28 PM
|
Joined: Sep 2006
Posts: 4,489
Paul the Brit'
Junk Yard Dog
|
Junk Yard Dog
Joined: Sep 2006
Posts: 4,489 |
Cliff Stamp tests knives to destruction... He kills lots of knives but likes Busse and Swamp Rat Knifeworks. He hasn't tested any Yard stuff I am aware of yet.
Your opinion of 440 is justified IMHO!
Patti (Dan's wife and allround nice person to deal with in my experience) can sometimes take a little time to reply to emails, if Gravel-Face offered to sell you a S6 or gave you a lead on one consider it! The S6 is VERY good and GF is a forum regular..
JYD #3 Poor, but still dreaming of a sage and black SOD CG...
|
|
|
Re: Ontario knife company
[Re: Paul the Brit']
#15439
01/30/07 09:33 PM
|
Anonymous
Unregistered
|
Anonymous
Unregistered
|
He did, but I think it is the shiny model. I want just the plain jane working rig. Not a show piece as no one will ever see it but me and some dead deer.IXNA on the ontario then....
Last edited by chaos; 01/30/07 09:34 PM.
|
|
|
Re: Ontario knife company
#15440
01/30/07 09:37 PM
|
Joined: Sep 2006
Posts: 4,489
Paul the Brit'
Junk Yard Dog
|
Junk Yard Dog
Joined: Sep 2006
Posts: 4,489 |
JYD #3 Poor, but still dreaming of a sage and black SOD CG...
|
|
|
Re: Ontario knife company
#15441
01/30/07 09:39 PM
|
Joined: Jan 2007
Posts: 103
Will
Mutt
|
Mutt
Joined: Jan 2007
Posts: 103 |
Just out of morbid curiosity, what IS your favorite hard use steel Chaos? Ever have any experience with Starrett 496-01 high carbon tool steel in a blade...? <img src="/ubbthreads/images/graemlins/shocked.gif" alt="" />
Last edited by Will; 01/30/07 11:41 PM.
|
|
|
Post deleted by Private Klink
#15442
01/30/07 09:56 PM
|
Anonymous
Unregistered
|
Anonymous
Unregistered
|
|
|
|
Re: Ontario knife company
#15443
01/30/07 10:28 PM
|
Anonymous
Unregistered
|
Anonymous
Unregistered
|
Just out of morbid curiosity, what IS your favorite hard use steel Chaos? Ever have any experience with Starrett (sp?) tool steel in a blade...? : I prefer the knife at the bottom of this page http://www.mooremaker.com/ I use one extensivley except it has handles made from Cow "shin Bones" jigged. Nothing fancy. Not sure of the exact steel that they use, but it is high carbon and Rust if you look at it funny. Clean and dress out upwards of 20 deer a season plus countless feral hogs year round. They take an edge very well and hold it even better. I've field dressed, skinned and quartered 3 deer in a single setting on ONE blade without ever hitting a whet stone. The blade is too thin on thier fixed blade model or I'd be using one of them for Pelvis duty. I have NO experience with Starret steel. I use an old Ka-bar currently, but it's coming apart from repeated use.
Last edited by chaos; 01/30/07 10:32 PM.
|
|
|
Re: Ontario knife company
#15444
01/30/07 10:53 PM
|
Joined: Sep 2006
Posts: 1,309
TKC
Junk Yard Dog
|
Junk Yard Dog
Joined: Sep 2006
Posts: 1,309 |
If you have the chance to get a Scrapper 6, then get one!!
JYD #6!
|
|
|
Re: Ontario knife company
[Re: TKC]
#15445
01/30/07 11:25 PM
|
Joined: Sep 2006
Posts: 56
perksy
Pooch
|
Pooch
Joined: Sep 2006
Posts: 56 |
The Ontario RATS are great knives especially for the $$. I have used the RAT7, TAK, RAT 3 and had a play with the old RTAK. I think the RAT 7 is the most compareable to the Scrapper 6. The RAT 7 is a though and versitile knife and would be a better slicer than the scrapper, but the scrapper would be the stronger of the two in terms of prying strength. I would probably give chopping to the scrapper, but I would like to try them at the same time to give a definite answere.
|
|
|
Re: Ontario knife company
[Re: perksy]
#15446
01/30/07 11:39 PM
|
Joined: Nov 2006
Posts: 215
PSG1
Mutt
|
Mutt
Joined: Nov 2006
Posts: 215 |
I have had really good luck with Becker Knife and Tool for the money. I have wanted to try a R7 in D2. What do you guys think, D2 or the Carbon?
I love my country but fear my government.
|
|
|
Re: Ontario knife company
[Re: PSG1]
#15447
01/31/07 12:00 AM
|
Joined: Sep 2006
Posts: 56
perksy
Pooch
|
Pooch
Joined: Sep 2006
Posts: 56 |
Carbon for sure. In a knife this size, I think D2 would be too brittle, plus 1095 is easier to sharpen.
|
|
|
Re: Ontario knife company
[Re: perksy]
#15448
01/31/07 01:13 AM
|
Joined: Sep 2006
Posts: 1,743
Leatherface
Junk Yard Dog
|
Junk Yard Dog
Joined: Sep 2006
Posts: 1,743 |
I like the Rat 3 in D2...I had one worked out on trade and the dude decided to give it to his bro that was deploying...
I to have had good luck with BK&T 7...I took the scales off because I have small girly hands but other than that it is nice...hmm I got some micarta laying around here somewhere..hmmm
Get a SS6 if ya can bro..I love mine!
|
|
|
Re: Ontario knife company
#15449
01/31/07 01:55 AM
|
Joined: Sep 2006
Posts: 6,743
Dumpster Dan
Junk Yard Dog
|
Junk Yard Dog
Joined: Sep 2006
Posts: 6,743 |
I've got an Ontario Spec-Plus Navy.. Supposedly 440A but it rusts like 1095! I wouldn't buy Ontario again, wait for the Scrapper 6! Did I mention it (Navy) was prone to small chips off the edge in moderate use?
In fairness I can't comment on the Rat 7 having not used one but they have reviewed well in a couple of British gun mags.. But they weren't Cliff Stamp'd! I like RUST!!!!!!! May be coincidence, but I have better luck with knives taking and holding an edge that have high enough carbon content to rust. I am just leery of the scrapper6 even becoming available again as my emmail hasn't been returned, nor anything posted in these forums about a definite timeframe. BTW what is "Cliff Stamped" Will b e using this blade HEAVILY for pelvis splitting while cleaning deer and utility use around the ranch. What was chipping? the finish? or the steel. 440 steel is [censored] IMHO Patti recieved an e-mail late this afternoon and has not had a chance to respond. We will be producing more Scrapper 6's. A difinitive date is not currrently available due to all our resouces being focused on bringing out the chopper...aka Dog Father. You mentioned in another posting about your concern on availablity before the next deer season, I would think we should be good for that. As far as performance is concerned, ScrapYard is founded on pure performance at the best possible price. So if you are looking for a company that will put it on the line, you found it. We warrant our knives againist any and all unintentional major damage for life and not just for the original owner. If you are looking for a pretty, pre-madonna show knife...this ain't the place. Its good to have you join the forum and run with the pack...Welcome! Dumpster Dan
|
|
|
Re: Ontario knife company
[Re: Dumpster Dan]
#15451
01/31/07 02:20 AM
|
Joined: Sep 2006
Posts: 3,533
Gravelface
Junk Yard Dog
|
Junk Yard Dog
Joined: Sep 2006
Posts: 3,533 |
1. all our resouces being focused on bringing out the chopper...aka Dog Father. 2. We warrant our knives againist any and all unintentional major damage for life and not just for the original owner.
3.If you are looking for a pretty, pre-madonna show knife...this ain't the place.
Dumpster Dan 1. Bring it!!! 2. That is why I buy these things!!!! Cover's second and third owners!!!! This is what has kept me from buying a certain Ghurka companies knives 2nd hand. 3. That catch on the Mojo is pretty....can you do something about cutting it off <img src="/ubbthreads/images/graemlins/laugh.gif" alt="" />
EMail if you have a spare 460!!!!
JYD# 2
|
|
|
Re: Ontario knife company
[Re: Dumpster Dan]
#15452
01/31/07 12:35 PM
|
Anonymous
Unregistered
|
Anonymous
Unregistered
|
Patti recieved an e-mail late this afternoon and has not had a chance to respond.
We will be producing more Scrapper 6's. A difinitive date is not currrently available due to all our resouces being focused on bringing out the chopper...aka Dog Father.
You mentioned in another posting about your concern on availablity before the next deer season, I would think we should be good for that.
As far as performance is concerned, ScrapYard is founded on pure performance at the best possible price. So if you are looking for a company that will put it on the line, you found it. We warrant our knives againist any and all unintentional major damage for life and not just for the original owner.
If you are looking for a pretty, pre-madonna show knife...this ain't the place.
Its good to have you join the forum and run with the pack...Welcome!
Dumpster Dan
Thanks for the confirmation that these will be made again. I wont be around the computer for the next couple of weeks or so. Hope it doesnt come out in that time frame. Chaos
|
|
|
Re: Ontario knife company
#15453
01/31/07 02:56 PM
|
Joined: Sep 2006
Posts: 46,656
Private Klink
Junk Yard Dog
|
Junk Yard Dog
Joined: Sep 2006
Posts: 46,656 |
Chaos - You got the word directly from "The Man"! I will echo what others have already said concerning the knives in question. I have The Rat7 in D2 AND 1095, and they are decent knives for the money - I LOVE the blade shape/taper/point of the Rat7. However, the Scrapper6 is much more strongly built and better suited for splitting a deer pelvis, etc. as you are interested in doing. Though I like both knives, I would strongly recommend Scrap Yard Knives - the BEST choice for performance, price, and warranty if EVER needed! Tom <img src="/ubbthreads/images/graemlins/thumbup.gif" alt="" />
Junk Yard Dog #1 Moderator/Leader of the Pack Good night Mrs. B, wherever you are! Long Live the Brotherhood of the Yard!
|
|
|
Re: Ontario knife company
[Re: Private Klink]
#15454
01/31/07 04:00 PM
|
Joined: Sep 2006
Posts: 4,489
Paul the Brit'
Junk Yard Dog
|
Junk Yard Dog
Joined: Sep 2006
Posts: 4,489 |
JYD #3 Poor, but still dreaming of a sage and black SOD CG...
|
|
|
Re: Ontario knife company
[Re: Private Klink]
#15455
01/31/07 04:26 PM
|
Joined: Sep 2006
Posts: 1,309
TKC
Junk Yard Dog
|
Junk Yard Dog
Joined: Sep 2006
Posts: 1,309 |
You heard it from Dan the Man!! What more do you need?!
JYD #6!
|
|
|
Re: Ontario knife company
[Re: TKC]
#15456
01/31/07 08:06 PM
|
Joined: Sep 2006
Posts: 4,489
Paul the Brit'
Junk Yard Dog
|
Junk Yard Dog
Joined: Sep 2006
Posts: 4,489 |
A Scrapper 6 is what chaos needs.. <img src="/ubbthreads/images/graemlins/thumbup.gif" alt="" />
JYD #3 Poor, but still dreaming of a sage and black SOD CG...
|
|
|
Re: Ontario knife company
[Re: Paul the Brit']
#15457
01/31/07 09:26 PM
|
Joined: Jan 2007
Posts: 2,066
tony22r
Junk Yard Dog
|
Junk Yard Dog
Joined: Jan 2007
Posts: 2,066 |
Paul, A Scrapper 6 is what chaos needs.. <img src="/ubbthreads/images/graemlins/thumbup.gif" alt="" /> heck I need one too! Thanks Dan!
JYD #5 "If you don't buy one now, you'll just kick yourself later.." -Karnack
|
|
|
Re: Ontario knife company
#15458
02/01/07 12:25 AM
|
Joined: Sep 2006
Posts: 6,743
Dumpster Dan
Junk Yard Dog
|
Junk Yard Dog
Joined: Sep 2006
Posts: 6,743 |
Patti recieved an e-mail late this afternoon and has not had a chance to respond.
We will be producing more Scrapper 6's. A difinitive date is not currrently available due to all our resouces being focused on bringing out the chopper...aka Dog Father.
You mentioned in another posting about your concern on availablity before the next deer season, I would think we should be good for that.
As far as performance is concerned, ScrapYard is founded on pure performance at the best possible price. So if you are looking for a company that will put it on the line, you found it. We warrant our knives againist any and all unintentional major damage for life and not just for the original owner.
If you are looking for a pretty, pre-madonna show knife...this ain't the place.
Its good to have you join the forum and run with the pack...Welcome!
Dumpster Dan
Thanks for the confirmation that these will be made again. I wont be around the computer for the next couple of weeks or so. Hope it doesnt come out in that time frame. Chaos You should be good Dan
|
|
|
Re: Ontario knife company
[Re: Dumpster Dan]
#15459
02/06/07 07:14 PM
|
Joined: Sep 2006
Posts: 1,309
TKC
Junk Yard Dog
|
Junk Yard Dog
Joined: Sep 2006
Posts: 1,309 |
You will have your Scrapper 6 for the next deer season!!
JYD #6!
|
|
|
|
|