Mine is a first responder, military knife.

-An overall size and grips from the Straight Handled Badger Attacks.
-A blade shape similar to the Satin Jack Tactical without the choil.
-A stock thickness of 0.20 - 0.22"
-Nuclear Meltdown rounded spine and most exposed edges, talon hole, etc.
-A butt with a flattened, integrated oval dropping to the bird's beak and including a spike/pry bar that can also act as a skull crusher.
-The curve of the spine leading into a blade catch like on the MoFo but with a sharpened inside radius to serve as a seat belt or strap cutter while the blade is still sheathed.
-The upper guard/blade catch/strap cutter will line up diagonally with talon hole forming a 'S', similar to the forward curve of the TAC scales.
-The plunge line will have a pronounced forward curve as seen on Steel Heart I or HG-55 cg.
-The plunge line will flow forward into a saber grind with a flat for the Busse Combat logo but with the edges curved to fit the overall convexed profile, extending a vertically narrowing full stock thickness to almost the tip.
-Below this saber area the blade will have the corrigated bevel treatment to reduce weight but retain rigidity and strength, similar to the HG-55 cg, but more curvy to flow better with the plunge line.
-A reinforced tip like the military overrun HG55 (but with the SJ TAC tip shape) flowing from the saber-ish treatment below and flowing into the rounded spine.
-Green and Black G10 scales. Carbon fiber would be cool though.
-The spine flowing into the tip with a 'penatrater' treatment or a sharpened swedge, ideally under 1/2".

Thanks,
Toast

Fusion inspired res-c handle with a blade similar to DF but without clip and less wide.

a scrap ax would be cool too lol

How about a rescue tool that has an axe, hammer and pry bar combo.

That would almost be a Crash Axe. Except it doesn't have a hammer. You could use the flat side as a hammer though...

Andy, I was thinking of something marketable to (dare I say) the non knife aficionados. It would be legal and or acceptable to have in your vehicle and for rescuers such as fireman, military, police etc.

I would like a hunting knife......bigger than a dumpster mutt.....but smaller than a yard guard......main thing I need on this knife....A GUTHOOK! You wonderful design teams can come up with the exact specifics, just please make me the ultimate hunting knife w/ a guthook!

As far as the axe's go......I'd like to see a broad axe.....with two cutting edges....kinda like Thor's axe. With a really long handle.....like two or three feet.

Hey everyone,

I posted this earlier on the Busse forum:

My idea would be to do a special knife honoring America's favorite rifle, the M16/Ar15/ otherwise known as the "The Black Rifle".

First off I would name the knife The "5.56" based on the NATO round that the M16 fires. The M16 with its 5.56 round is efficient, accurate, and powerful.

As for the design; I am thinking Special forces Natural Outlaw blade with a Tank Buster handle.

I am also thinking that the blade should be only offered in black.


Have a good Labor Day weekend!

Joe - Howdy and Welcome to the Scrap Yard! <img src="/ubbthreads/images/graemlins/laugh.gif" alt="" />

Thanks Private,

I have been hanging around for a while, figured it was about time I join in with you maniacs.

theres always an ulu .... i been eyeing one of those and a cleaver for a while