So I was bored and decided to Measure my bussekin, focusing on the B11 and comparing it to the Dogfather.
Here are my results:
Overall length is 16 inches.
Blade length is 11 1/4 inches.

Over all length is about 16 1/4 inches making the handle 5 inches.

Cutting edge length is about 9 7/8 inches

Dogfather is much thicker than the Basic 11

At first blade thickness is 1/4 inch

Then drops down to just over 3/16 of an inch or 7/32 of an inch and the rest of the length stays at 7/32 in

Dogfather is just over 1/4 ich or 9/32 of an inch

Deregulator is 5/16 of an inch

Dan please make all future knives in this handle, shrink it for smaller knives....thumbs up <img src="/ubbthreads/images/graemlins/thumbup.gif" alt="" />

Basic 11 handles have plenty of room for me but I have bitch hands

Some BAD knives
[img]http://img33.imageshack.us/img33/9029/all3q.jpg[/img]

Basic 11
*Feels better in hand than the Dogfather
*Feels like a machete because its light, my friend thought it was a machete
*Came hair wittling sharp(yes I tested it)
*Goes through paper like nothing because of its full flat grind
*I consider it 7/32 of an inch thick not 1/4 inch
*I need a sheath
*Regulator handles rock(I like that they arent at an angle to the blade. I would like a chopper with straight handle res-c)

Deregulator is 15.6 ounces
[img]http://img341.imageshack.us/img341/5521/regweight.jpg[/img]
Basic 11 is 16.6 ounces
[img]http://img341.imageshack.us/img341/8855/b11weight.jpg[/img]
Dogfather is 20.6 ounces
[img]http://img341.imageshack.us/img341/3878/dogweight.jpg[/img]
wierd how they all are .6 ounces, thats bad luck .6.6.6 (this just shows that bussekin knives will survive the apocalypse <img src="/ubbthreads/images/graemlins/ooo.gif" alt="" />)