Thanks guys, Maybe Tommorow I'll try it again, this was my first time.
Things you need * 1-3 Batts
* Coke (works better than the lemon juice I used)
* Aluminum foil
* Alligator clips
* Wire
* Dish or cup
* Obviously whatever your anodizing
-First You have to scrub off the oxidation that's already on the Titanium,etc (Titanium is easiest).
-I used a Scotch Brite pad until is was shiney and smooth.
-Put it in A cleaning solution/ Acetone works best. I used Alchohol
-Hook the Batts together as my Pic shows.
-Put aluminum foil in the solution and half out so the clip can hook to it. The more foil the better, when I first started I got more color from the end nearest to the foil.
-DO NOT touch the Ti with the foil!
-Hook the other clip to the Ti. Submerge in cola.
-Leave it in for 5 mins or so. You can take it out and check on it every once and a while it won't hurt it.
-If you use 1 Batt you will get a gold/ bronze color
-If you use 2 Batts you will get lighish blue
-If you use 3 Batts you will get the dark purple color I got
-NOTE: make sure you place the Ti right out of the cleaning solution to the
cola-It will oxidize quickly in air- Giving you a crappier finish product.
Mine doesn't look that good beacause It wasn't clean enough/ Was exposed to long.
-If you check on it and it is only gold/Bronze you need to leave it in longer NOTE: it needs to cycle through all the colors.
Sorry for the Crappy pics, It was even crappier outside <img src="/ubbthreads/images/graemlins/rolleyes.gif" alt="" />
Sharp I did not acctually take Chemistry this year. I.E-I didn't know all the detales
Thanks Sharp for explaining. <img src="/ubbthreads/images/graemlins/thumbup.gif" alt="" />
