As I promised yesterday, this is gonna be a very woody post. <img src="/ubbthreads/images/graemlins/laugh.gif" alt="" />

Here was what I did yesterday. 1 wood palette.



Big friggin' pile of wood.

Here is what's gonna get destroyed today. <img src="/ubbthreads/images/graemlins/laugh.gif" alt="" />



The technique that I used was:

First loosen up the board with the RMD.



No damage.



Then take the FFFBM for the really heavy prying.



This board was being a little stubborn...so I went to plan B...DESTROY!!!!!

The pictures speak for themselves.









After that I had several leverage points so I easily took of the wood and bent the nails, etc, etc.



Here's me doing the first technique.

Pry with RMD.
[img]http://i235.photobucket.com/albums/ee292/The_Aaij_1/DSC_0029.jpg[/img]

[img]http://i235.photobucket.com/albums/ee292/The_Aaij_1/DSC_0030-1.jpg[/img]

FFBM time!!!

[img]http://i235.photobucket.com/albums/ee292/The_Aaij_1/DSC_0031-1.jpg[/img]

[img]http://i235.photobucket.com/albums/ee292/The_Aaij_1/DSC_0032-2.jpg[/img]

[img]http://i235.photobucket.com/albums/ee292/The_Aaij_1/DSC_0033-1.jpg[/img]

WHOO!!!

OK... so then I decided to see what the FBM could handle. There were two thick boards stuck together, by nails. I was able to pry it apart and the wood literally just tore.

[img]http://i235.photobucket.com/albums/ee292/The_Aaij_1/DSC_0041-2.jpg[/img]

Oh and I also wasn't very careful during all of this and constantly scraped the tip of the FFBM into nails and, once, straight into a rock...it's fine...fat tip!!! <img src="/ubbthreads/images/graemlins/laugh.gif" alt="" />

[img]http://i235.photobucket.com/albums/ee292/The_Aaij_1/DSC_0043-1.jpg[/img]

Some more wood to the pile!!!!

[img]http://i235.photobucket.com/albums/ee292/The_Aaij_1/DSC_0044.jpg[/img]

I'm still not finished. There's still some food left!!!!!

I probably won't get it finished until the end of this week or so. <img src="/ubbthreads/images/graemlins/laugh.gif" alt="" />

Anyone want some wood???? <img src="/ubbthreads/images/graemlins/laugh.gif" alt="" />

BTW... don't try this with any other knife. You might actually get it out of alignment. During all of this, I was able to bend the FFFBM, very thick, way beyond 30 degrees. It bent way beyond what I was comfortable for it to bend. Both are extremely flexible though. Good thing they are too. <img src="/ubbthreads/images/graemlins/bowdown.gif" alt="" />