Well I just came back from decontruction of wood palettes.

It was fun, I used my RMD and my FFFBM. Mostly my FBM cuz it's extremely friggin' thick. But the RMD was actually pretty decent.

Srry I don't have any pictures of the palettes but I'll try to get some of the aftermath. <img src="/ubbthreads/images/graemlins/laugh.gif" alt="" />

There's still half a palette of decent wood left. So I could destroy some more. WHOO!!!!!!

Right now I'm just resting and watching some shows in my home-theater... I don't have a pic of that either. <img src="/ubbthreads/images/graemlins/laugh.gif" alt="" />

I'm chillin' sipping on some G2 and eating a Clif Bar. <img src="/ubbthreads/images/graemlins/laugh.gif" alt="" />

Anyways, I'm tired but anticipate for a really woody next post filled with pictures of wood and wood and more wood and knives. <img src="/ubbthreads/images/graemlins/laugh.gif" alt="" />

Can't wait to see the pics of the aftermath, sounds like you had a real good time. <img src="/ubbthreads/images/graemlins/grin.gif" alt="" /> <img src="/ubbthreads/images/graemlins/thumbup.gif" alt="" />

I need some wood pallets.

As I promised yesterday, this is gonna be a very woody post. <img src="/ubbthreads/images/graemlins/laugh.gif" alt="" />

Here was what I did yesterday. 1 wood palette.



Big friggin' pile of wood.

Here is what's gonna get destroyed today. <img src="/ubbthreads/images/graemlins/laugh.gif" alt="" />



The technique that I used was:

First loosen up the board with the RMD.



No damage.



Then take the FFFBM for the really heavy prying.



This board was being a little stubborn...so I went to plan B...DESTROY!!!!!

The pictures speak for themselves.









After that I had several leverage points so I easily took of the wood and bent the nails, etc, etc.



Here's me doing the first technique.

Pry with RMD.
[img]http://i235.photobucket.com/albums/ee292/The_Aaij_1/DSC_0029.jpg[/img]

[img]http://i235.photobucket.com/albums/ee292/The_Aaij_1/DSC_0030-1.jpg[/img]

FFBM time!!!

[img]http://i235.photobucket.com/albums/ee292/The_Aaij_1/DSC_0031-1.jpg[/img]

[img]http://i235.photobucket.com/albums/ee292/The_Aaij_1/DSC_0032-2.jpg[/img]

[img]http://i235.photobucket.com/albums/ee292/The_Aaij_1/DSC_0033-1.jpg[/img]

WHOO!!!

OK... so then I decided to see what the FBM could handle. There were two thick boards stuck together, by nails. I was able to pry it apart and the wood literally just tore.

[img]http://i235.photobucket.com/albums/ee292/The_Aaij_1/DSC_0041-2.jpg[/img]

Oh and I also wasn't very careful during all of this and constantly scraped the tip of the FFBM into nails and, once, straight into a rock...it's fine...fat tip!!! <img src="/ubbthreads/images/graemlins/laugh.gif" alt="" />

[img]http://i235.photobucket.com/albums/ee292/The_Aaij_1/DSC_0043-1.jpg[/img]

Some more wood to the pile!!!!

[img]http://i235.photobucket.com/albums/ee292/The_Aaij_1/DSC_0044.jpg[/img]

I'm still not finished. There's still some food left!!!!!

I probably won't get it finished until the end of this week or so. <img src="/ubbthreads/images/graemlins/laugh.gif" alt="" />

Anyone want some wood???? <img src="/ubbthreads/images/graemlins/laugh.gif" alt="" />

BTW... don't try this with any other knife. You might actually get it out of alignment. During all of this, I was able to bend the FFFBM, very thick, way beyond 30 degrees. It bent way beyond what I was comfortable for it to bend. Both are extremely flexible though. Good thing they are too. <img src="/ubbthreads/images/graemlins/bowdown.gif" alt="" />

Gret pics. 30 degrees huh? Nice.

Yes... 30 degrees. Maybe more. I kind of bent it to the point where most knives that are 1/4 thick would have snapped. It was bent pretty far. I actually thought I would bend the blade permanently but it didn't happen. <img src="/ubbthreads/images/graemlins/laugh.gif" alt="" />

Oh, BTW, the dent that I was talking about on Northern1's post, it's on the picture with the FFBM tip. You can barely see it. <img src="/ubbthreads/images/graemlins/laugh.gif" alt="" />

way to work that blade, the fbm is a pry bar as thick as it is

i could use some wood. nice shots.

Scrappy,

Yes, I'd think something that is 5/16 in thick would definitely be a pry bar. <img src="/ubbthreads/images/graemlins/laugh.gif" alt="" />

Only problem is the tip of the FBM is waaaay too fat to fit into any crevice...that's what the RMD is for. <img src="/ubbthreads/images/graemlins/laugh.gif" alt="" />

M22,

Wood give for FBM. <img src="/ubbthreads/images/graemlins/laugh.gif" alt="" /> <img src="/ubbthreads/images/graemlins/laugh.gif" alt="" />

Good job. <img src="/ubbthreads/images/graemlins/laugh.gif" alt="" />

Thanks,

I hope this little mini review will put all your fears of prying things with a Busse Kin Knife, tip or blade, to rest. <img src="/ubbthreads/images/graemlins/laugh.gif" alt="" />

... not that many of you fear tip breaking, but I've seen my fair share in other knives. <img src="/ubbthreads/images/graemlins/frown.gif" alt="" />

This technically belongs here.

JUMP ON THE FFFBM!!!!!!!!!!! <img src="/ubbthreads/images/graemlins/laugh.gif" alt="" />





I'm gonna laugh every time I see this. <img src="/ubbthreads/images/graemlins/smirk.gif" alt="" /> <img src="/ubbthreads/images/graemlins/laugh.gif" alt="" />