Scrapper 6 abuse
#278256
04/18/09 05:05 PM
|
Joined: Feb 2007
Posts: 3,574
james_bond
OP
Junk Yard Dog
|
OP
Junk Yard Dog
Joined: Feb 2007
Posts: 3,574 |
I was able to help a friend of mine is put a 2" lift on a '73 Ford Bronco. In order to do this you gotta first remove the VERY RUSTED bolts that hold the frame and body togather. Around these bolts are the original heavy rubber bumpers with steel washers. He was trying to pry at it with a heafty screwdriver but the tip was not deep in enough, I thought my S6 would alteast help, it did, we were able to tear/cut off the rubber bumpers with the S6 making room got the saws-all to do its job. There was a point where I pounded my S6 in with a hammer and pryed on it with all my weight, then I heard a loud low pich "snap" my heart just about skiped a beat as I thought' "Great I just broke my faveorite knife." Then I pulled my S6 out an the tip was still there <img src="/ubbthreads/images/graemlins/shocked.gif" alt="" /> I was extreamly relived to see my S6 in one piece. Upon further inspection I did break a tiny little bit of the knife's tip off. but not bad at all. The black stuff all over the knife is burnt rubber we tried a tourch to get thoses nasty bumpers off. There are also a few small dents/rolls in the edge where I was pounding it with a hammer in to a steel collar or bolt that is inside the rubber bumper. This pounding also caused some light deformation of the spine from the hammer strikes. The whole thing took a long time and was a tricky in such tight spaces. My friend was impressed with my knife saying "Wow that is a tough knife." I smiled and said, "I know, I love it." Here are some pics of the aftermath, again I am more than pleased with how well this knife stood up to the unreanonable abuse that would have failed any other knife and voided its warrantee.
JYD #25
Clinging to my Guns, Religion, and Scrapyards.
|
|
|
Re: Scrapper 6 abuse
[Re: james_bond]
#278257
04/18/09 05:14 PM
|
Joined: Jan 2008
Posts: 3,141
imaginefj
Junk Yard Dog
|
Junk Yard Dog
Joined: Jan 2008
Posts: 3,141 |
Heck, that doesn't look too bad at all!
Join the NRA
JYD #69 If a 6 turned out to be 9
Join the NRA
|
|
|
Re: Scrapper 6 abuse
[Re: imaginefj]
#278258
04/18/09 05:17 PM
|
Joined: Feb 2007
Posts: 3,574
james_bond
OP
Junk Yard Dog
|
OP
Junk Yard Dog
Joined: Feb 2007
Posts: 3,574 |
Heck, that doesn't look too bad at all! Ya the worst part is my photo skills. <img src="/ubbthreads/images/graemlins/grin.gif" alt="" />
JYD #25
Clinging to my Guns, Religion, and Scrapyards.
|
|
|
Re: Scrapper 6 abuse
[Re: imaginefj]
#278259
04/18/09 05:19 PM
|
Joined: Dec 2007
Posts: 4,688
MRpink
Junk Yard Dog
|
Junk Yard Dog
Joined: Dec 2007
Posts: 4,688 |
Hahah, nice. Now it has character.
JYD #56
Scrap Yard Sword Club #00
|
|
|
Re: Scrapper 6 abuse
[Re: MRpink]
#278260
04/18/09 06:00 PM
|
Joined: Mar 2009
Posts: 323
gRat
Mongrel
|
Mongrel
Joined: Mar 2009
Posts: 323 |
|
|
|
Re: Scrapper 6 abuse
[Re: gRat]
#278261
04/18/09 06:23 PM
|
Joined: Nov 2008
Posts: 4,902
mcjhrobinson
Junk Yard Dog
|
Junk Yard Dog
Joined: Nov 2008
Posts: 4,902 |
"Hey, this sure beats paying a Shrink $200.00 an hour" - Skunk Hunter
JYD #65
|
|
|
Re: Scrapper 6 abuse
[Re: mcjhrobinson]
#278262
04/18/09 06:29 PM
|
Joined: Mar 2008
Posts: 1,293
tyger75
Junk Yard Dog
|
Junk Yard Dog
Joined: Mar 2008
Posts: 1,293 |
That's it, you're SYK privileges have been revoked. Put all your blades in cardboard box, and ship them here, right now, where they'll be appropriately treated! The only other thing I have to say is: GIMME GIMME GIMME! <img src="/ubbthreads/images/graemlins/grin.gif" alt="" />
JYD#70
Warning! There are more than just dogs in this yard!
|
|
|
Re: Scrapper 6 abuse
[Re: tyger75]
#278263
04/18/09 07:24 PM
|
Joined: Sep 2006
Posts: 46,721
Private Klink
Junk Yard Dog
|
Junk Yard Dog
Joined: Sep 2006
Posts: 46,721 |
J.B. - you certainly got use out of your knife! <img src="/ubbthreads/images/graemlins/thumbup.gif" alt="" /> <img src="/ubbthreads/images/graemlins/grin.gif" alt="" />
Junk Yard Dog #1 Moderator/Leader of the Pack Good night Mrs. B, wherever you are! Long Live the Brotherhood of the Yard!
|
|
|
Re: Scrapper 6 abuse
[Re: Private Klink]
#278264
04/18/09 09:32 PM
|
Joined: Jan 2008
Posts: 1,177
Tikigod
Junk Yard Dog
|
Junk Yard Dog
Joined: Jan 2008
Posts: 1,177 |
I think it gives the knife that "loved" look that all SY knives need...
JYD #80
[i]Live like you mean it.
|
|
|
Re: Scrapper 6 abuse
[Re: Tikigod]
#278265
04/18/09 10:09 PM
|
Joined: Dec 2007
Posts: 2,207
reconseed
Junk Yard Dog
|
Junk Yard Dog
Joined: Dec 2007
Posts: 2,207 |
you aint gonna hurt the S6 son! <img src="/ubbthreads/images/graemlins/smile.gif" alt="" />
JYD #59
1LT Clark Tucker
OD, Platoon LDR
US Army
|
|
|
Re: Scrapper 6 abuse
[Re: james_bond]
#278266
04/19/09 12:10 AM
|
Joined: Sep 2006
Posts: 6,743
Dumpster Dan
Junk Yard Dog
|
Junk Yard Dog
Joined: Sep 2006
Posts: 6,743 |
I was able to help a friend of mine is put a 2" lift on a '73 Ford Bronco. In order to do this you gotta first remove the VERY RUSTED bolts that hold the frame and body togather. Around these bolts are the original heavy rubber bumpers with steel washers. He was trying to pry at it with a heafty screwdriver but the tip was not deep in enough, I thought my S6 would alteast help, it did, we were able to tear/cut off the rubber bumpers with the S6 making room got the saws-all to do its job. There was a point where I pounded my S6 in with a hammer and pryed on it with all my weight, then I heard a loud low pich "snap" my heart just about skiped a beat as I thought' "Great I just broke my faveorite knife." Then I pulled my S6 out an the tip was still there <img src="/ubbthreads/images/graemlins/shocked.gif" alt="" /> I was extreamly relived to see my S6 in one piece. Upon further inspection I did break a tiny little bit of the knife's tip off. but not bad at all.
The black stuff all over the knife is burnt rubber we tried a tourch to get thoses nasty bumpers off. There are also a few small dents/rolls in the edge where I was pounding it with a hammer in to a steel collar or bolt that is inside the rubber bumper. This pounding also caused some light deformation of the spine from the hammer strikes.
The whole thing took a long time and was a tricky in such tight spaces. My friend was impressed with my knife saying "Wow that is a tough knife." I smiled and said, "I know, I love it."
Here are some pics of the aftermath, again I am more than pleased with how well this knife stood up to the unreanonable abuse that would have failed any other knife and voided its warrantee.
Hey Noss...need a qualified helper <img src="/ubbthreads/images/graemlins/cool.gif" alt="" /> Thanks for sharing Dan
|
|
|
Re: Scrapper 6 abuse
[Re: james_bond]
#278267
04/19/09 12:22 AM
|
Joined: Nov 2008
Posts: 1,419
Poi Dog
Junk Yard Dog
|
Junk Yard Dog
Joined: Nov 2008
Posts: 1,419 |
Wow, that's some abuse. You definitely qualify to be on Noss's team. Thanks for sharing your experiences and pics <img src="/ubbthreads/images/graemlins/cool.gif" alt="" />
JYD #78
Aloha hard!!
|
|
|
|
|