In praise of the working Scrap Yards
#557104
09/27/10 04:21 AM
|
Joined: Apr 2009
Posts: 152
damon
OP
Mutt
|
OP
Mutt
Joined: Apr 2009
Posts: 152 |
Short little report from the field: I know knives have a lot of different uses, for me they are used in the roles of jack-of-all-trades, backpacking; wood gathering chopper; and short bladed animal processors. In previous posts I praised the S5 as the ultimate do-it-all pack knife and it remains THE knife in that realm. So far, nothing I have ever used touches the greatness of my old Battle Rat for camp chopper, but for some reason, I have been on a considerable search for the ultimate game knife.
This last weekend, some work, but more importantly, Divine Providence came together and afforded me the opportunity to use a few of my scrapyards on my first Colorado mule deer buck taken with the bow. While I have used the SS4 a time or two already on Pronghorn, I (fairly) recently acquired my ScrapMuk in a trade and have been itching to try it out as a skinner. Straight and to the point, the Muk is, without exception, the most efficient cutting tool I own for this kind of work. While the SS4 did “ok” there was simply no comparison when it came to edge holding. Not only did the Muk quarter the whole animal (I use a “gutless” method that does not require anything more than a stout fixed blade) but it also processed it when we got home…and was still arm hair shaving sharp afterwards (this is quite a feat considering the amount of “winter gristle” that we had to cut through).
Anyway, when I first saw the Muk, I was a bit underwhelmed by the unsharpened “un-choil” area. But I have to say that this was not at all a negative for this blade, in fact I think that it aided in the specified task. One thing that I have always had a hard time with my Howling Rat is that big choil that seemed to be a magnet for hanging up on the carcass as I skinned and then, on the meat as we processed the animal. No such issue at all with the Muk, just smooth sailing all the way through! I’ll stop it here but just to say “thanks” for such a great, “user” blade!
The Muk, paired with a SY 154 CM thinner/smaller (3 in or so), pointier (bird dog/wiener dog), choil-less blade would be the ultimate game processing combo. I would think they would sell like wildfire, but I guess Dan and crew have their hands full at the moment. Anyway, thanks again to SY and for Andy Wayne for trading me blades! (Anyone want a used HR? <img src="/ubbthreads/images/graemlins/grin.gif" alt="" /> )
|
|
|
Re: In praise of the working Scrap Yards
[Re: damon]
#557105
09/27/10 06:07 AM
|
Joined: Sep 2009
Posts: 3,860
myketheknife
Junk Yard Dog
|
Junk Yard Dog
Joined: Sep 2009
Posts: 3,860 |
Man thats what I wanted to here.I figured the Muk & Wiener would be a good pair for deer/elk processing & plan to carry mine this year. And hopefully use them. <img src="/ubbthreads/images/graemlins/crossfingers.gif" alt="" /> Thanks for the report Damon. <img src="/ubbthreads/images/graemlins/thumbup.gif" alt="" /> <img src="/ubbthreads/images/graemlins/smile.gif" alt="" />
SYKCO JYD#112 It's better to have it & not need it, than to need it & not have it.
|
|
|
Re: In praise of the working Scrap Yards
[Re: damon]
#557106
09/27/10 12:41 PM
|
Joined: Sep 2006
Posts: 6,743
Dumpster Dan
Junk Yard Dog
|
Junk Yard Dog
Joined: Sep 2006
Posts: 6,743 |
Short little report from the field: I know knives have a lot of different uses, for me they are used in the roles of jack-of-all-trades, backpacking; wood gathering chopper; and short bladed animal processors. In previous posts I praised the S5 as the ultimate do-it-all pack knife and it remains THE knife in that realm. So far, nothing I have ever used touches the greatness of my old Battle Rat for camp chopper, but for some reason, I have been on a considerable search for the ultimate game knife.
This last weekend, some work, but more importantly, Divine Providence came together and afforded me the opportunity to use a few of my scrapyards on my first Colorado mule deer buck taken with the bow. While I have used the SS4 a time or two already on Pronghorn, I (fairly) recently acquired my ScrapMuk in a trade and have been itching to try it out as a skinner. Straight and to the point, the Muk is, without exception, the most efficient cutting tool I own for this kind of work. While the SS4 did “ok” there was simply no comparison when it came to edge holding. Not only did the Muk quarter the whole animal (I use a “gutless” method that does not require anything more than a stout fixed blade) but it also processed it when we got home…and was still arm hair shaving sharp afterwards (this is quite a feat considering the amount of “winter gristle” that we had to cut through).
Anyway, when I first saw the Muk, I was a bit underwhelmed by the unsharpened “un-choil” area. But I have to say that this was not at all a negative for this blade, in fact I think that it aided in the specified task. One thing that I have always had a hard time with my Howling Rat is that big choil that seemed to be a magnet for hanging up on the carcass as I skinned and then, on the meat as we processed the animal. No such issue at all with the Muk, just smooth sailing all the way through! I’ll stop it here but just to say “thanks” for such a great, “user” blade!
The Muk, paired with a SY 154 CM thinner/smaller (3 in or so), pointier (bird dog/wiener dog), choil-less blade would be the ultimate game processing combo. I would think they would sell like wildfire, but I guess Dan and crew have their hands full at the moment. Anyway, thanks again to SY and for Andy Wayne for trading me blades! (Anyone want a used HR? <img src="/ubbthreads/images/graemlins/grin.gif" alt="" /> )
A great write up Thanks for sharing Dan
|
|
|
Re: In praise of the working Scrap Yards
[Re: damon]
#557107
09/27/10 04:57 PM
|
Joined: Mar 2007
Posts: 47
dogrunner
Lap Dog
|
Lap Dog
Joined: Mar 2007
Posts: 47 |
.... In previous posts I praised the S5 as the ultimate do-it-all pack knife and it remains THE knife in that realm. So far, nothing I have ever used touches the greatness of my old Battle Rat for camp chopper, but for some reason, I have been on a considerable search for the ultimate game knife.
...
The Muk, paired with a SY 154 CM thinner/smaller (3 in or so), pointier (bird dog/wiener dog), choil-less blade would be the ultimate game processing combo. I would think they would sell like wildfire, but I guess Dan and crew have their hands full at the moment. Anyway, thanks again to SY and for Andy Wayne for trading me blades! (Anyone want a used HR? <img src="/ubbthreads/images/graemlins/grin.gif" alt="" /> )
Nice thoughtful report. We have similar preferences I think. I missed the muks when they came out, and still like my HR, but I'd buy TWO little knives as you described, as long as they have res-C handles! Sounds like a great little pocket knife design, so I wanted to register my vote in favor. Would be useful, and maybe they could be made from, ahem, "scraps" (ok, maybe not).
|
|
|
Re: In praise of the working Scrap Yards
[Re: dogrunner]
#557108
09/27/10 05:55 PM
|
Joined: Feb 2010
Posts: 4,889
Endeavour Morse
Junk Yard Dog
|
Junk Yard Dog
Joined: Feb 2010
Posts: 4,889 |
I'd like to see something like the Boss Street (4" of .150" INFI) come out of the Yard. My collection is sorely lacking "small" blades now (excluding Swamp Wardens). Its fun to collect and use "big" knives, but I'm ready for some smaller ones too....especially....if it comes with Dan's performance to price ratio! <img src="/ubbthreads/images/graemlins/bowdown.gif" alt="" />
My wife has very small hands, and would also benefit from a smallish blade. However, she loves the SOD I gave her last week so who knows ! <img src="/ubbthreads/images/graemlins/ooo.gif" alt="" />
JYD #123 The great one formerly known as Architect.
I am now a fictional British television police officer (currently a Detective Sgt) at Thames Valley Station. My governor is Detective Inspector Fred Thursday and it’s 1969.
|
|
|
Re: In praise of the working Scrap Yards
[Re: Endeavour Morse]
#557109
09/27/10 06:29 PM
|
Joined: Nov 2008
Posts: 13,668
sumoj275
Junk Yard Dog
|
Junk Yard Dog
Joined: Nov 2008
Posts: 13,668 |
Thanks for the report. Yep, it is hard to beat some fine Yard steel. A 4" Yard Boss and I am in.
Men you can't trust, women you can't trust, beasts you can't trust, but Bussekin steel you can trust
|
|
|
Re: In praise of the working Scrap Yards
[Re: sumoj275]
#557110
09/27/10 06:32 PM
|
Joined: Feb 2010
Posts: 4,889
Endeavour Morse
Junk Yard Dog
|
Junk Yard Dog
Joined: Feb 2010
Posts: 4,889 |
Jeff - I like it (Yard Boss)!
I might have some pics of my wife using the SOD next week during a camping trip.
JYD #123 The great one formerly known as Architect.
I am now a fictional British television police officer (currently a Detective Sgt) at Thames Valley Station. My governor is Detective Inspector Fred Thursday and it’s 1969.
|
|
|
Re: In praise of the working Scrap Yards
[Re: Endeavour Morse]
#557111
09/27/10 06:39 PM
|
Joined: Nov 2008
Posts: 13,668
sumoj275
Junk Yard Dog
|
Junk Yard Dog
Joined: Nov 2008
Posts: 13,668 |
Arch, that would be grand!
Men you can't trust, women you can't trust, beasts you can't trust, but Bussekin steel you can trust
|
|
|
Re: In praise of the working Scrap Yards
[Re: damon]
#557112
09/28/10 02:46 PM
|
Joined: Aug 2008
Posts: 2,982
Renee
Junk Yard Dog
|
Junk Yard Dog
Joined: Aug 2008
Posts: 2,982 |
Great report, thanks for sharing! <img src="/ubbthreads/images/graemlins/thumbup.gif" alt="" />
JYD #106
|
|
|
Re: In praise of the working Scrap Yards
[Re: Renee]
#557113
09/29/10 09:36 PM
|
Joined: Feb 2007
Posts: 8,297
Rainwalker
Junk Yard Dog
|
Junk Yard Dog
Joined: Feb 2007
Posts: 8,297 |
Hard to beat praise like that!!! <img src="/ubbthreads/images/graemlins/ooo.gif" alt="" /> <img src="/ubbthreads/images/graemlins/thumbup.gif" alt="" />
A good Busse 154cm blade on Mudder handles is a heck of a great combo for a knife! <img src="/ubbthreads/images/graemlins/cool.gif" alt="" />
JYD#35 Dog Walkin in the Rain
|
|
|
|
|