Blade length is 3.5 to the Handle with 3 1/8th cutting edge
Handle length is 5 inches
Blade height is 1.5
Blade thickness 3/16ths
Handle thickness 5/8ths
Not sure of the weight on it. You can have the blade engraved for an extra $10. That is from an email Justin sent me.
Overall weight 7.2oz (per Private Klink)

Here is my initial impressions:
It is a VERY well made folder. It's fairly heavy but carries surprisingly well in the pocket. And when you whip this bad boy out, people take notice!

The fit and finish are fantastic. Couldn't find a blemish anywhere or anything out of line, and I looked.

The liner lock is bank vault solid and is pretty close to an eighth of an inch thick. You could destroy a Buick with this thing.

I took a closer look at the pivot area, between the blade and liners. It appears as if the blade is sandwiched between two (One on each side) phosphor bronze bushings. I don't know if they are solid bushings or with numerous holes like the bushings in Chris Reeve knives bushings.

The back of the handle uses barrel spacers for approx 2/3 of it's length with the final portion filled with a solid laminated (possibly G10 or Micarta) material.

The feel in the hand is spot on as well and when held in the sabre grip your thumb falls right at the end of the handle and the blade continues the slight "Up hill" rise with a small GRADUAL hump that you should be able to see in the pics.

Only suggestion I can think of is that there could have been some small jimping where the blade and handle overlap. Other than that, I can't find anything that I don't like about it, so far. We will see but I don't figure I'll change my mind. On a side note you now have your choice of green or black handles.